220 Volt Dry Ice Cleaning Machine 60hz For Auto Repair Shop 3mm Particle Size

Carbon Deposit Combustion Chamber Dry Ice Cleaning Machine For Auto Repair Shop

Product Description

Dry ice blasting is a revolutionary blasting method that uses small, compact dry ice pellets as the blasting material. The dry ice pellets are accelerated in a jet of compressed air similar to that used in traditional blasting methods. Dry Ice Blasting will often allow a company's production equipment to be cleaned while in operation without the need for dismantling and costly downtime. Dry Ice Blasting is non-abrasive, and surfaces are therefore treated gently. The system can thus be used on easily-damaged surfaces like nickel, chromium and soft aluminum. The process is dry, and no waste materials are produced. This means that cleaning can be carried out even during short production shutdowns.

How does it clean surfaces?

The cleaning action of dry ice blasting is based on three physical effects:

1. As with many other blasting methods, the accelerated particles emit kinetic energy on impact allowing for the breakdown of stubborn agents including silicone, rubber, dyes and paints. The Mohs hardness (scale of mineral hardness) of the pellets produced during dry ice blasting is approximately the same as that of plaster, ensuring a potent clean.
2. Thermal energy from the abrupt cooling to -79°C causes a thermal shock effect and produces fine cracks in the top layer of material to be removed causing it to go brittle and crumble away from the surface.
3. Some of the frozen carbon dioxide penetrates the cracks in the dirt crusts caused by the thermal shock where it sublimates, increasing 400-fold in volume and, on a microscopic scale it literally blasts these dirt layers off. Through these three physical effects, dry ice blasting is able to remove unwanted paints, oil, grease, tar, bitumen, ink, resin, adhesives, wax, silicon and rubber residues, chewing gum and a wide variety of dirt encrustations from diverse substrates.

The ability to clean effectively without damaging surfaces and not leaving vast amounts of waste, makes dry ice blasting is another reason why this can be an effective solution for tackling dirt found within cleanrooms. The fact that dry ice blasting uses no chemicals and leaves no wastewater, also makes it an environmentally friendly solution for areas where cleaning with water is prohibited, including electrical wiring.

Dry ice blasting is non-abrasive and can be controlled for regulated for use on hard or delicate surfaces making it an effective cleaning solution within controlled environments.

It also does not require supplementary chemical agents within the cleaning process, making it highly effective for cleaning on the sensitive materials that may be found in regulated cleanrooms.

Technical Parameters

Our Company:

WONDERFU was established in 1998. And we have 20 years’ experience in manufacturing automotive garage equipments. We are professional in producing refrigerant AC service machine.

Wonderfu will always offer you good quality products with competitive price.

Contact us now!