Active Member
|
[China]
Address: No. 307-310 Shishan Industrial Zone, Guangming New Zone, Shenzhen
Contact name:Scarlett
Shenzhen Bangrong Automotive Supplies Co.,Ltd. |
|
|
High Hardness 2K Auto Spray Paint Automotive Refinish Paint
Free Samples can be provided!
Features: medium to high solid content, high hardness, very good weatherability, durable and high gloss paint film.
2K Paint
It is a bi-component car refinish paint series, high quality single coat system. It can be cured under room temperature or through low-temperature baking. With the following advantages: fast drying, high hardness, high gloss, bright color, excellent covering power, easy spraying, etc.
1K Paint
It is a high quality base coat series, two coats and three coats system. Silver, pearl or solid color tinters are included. Excellent covering power, metallic effect, easy spraying.
Clear Coat
To satisfy different customers, we have three kinds of quality with high performance varnish, the economic type, standard type, high solid content type, and all of them are with high hardness, high gloss,resistance to alcohol and gasoline. To spray on the 1K base coat, the clear coat can provide it the protection, durability and brightness. The crystal shinning and smooth effect can be obtained after wet spray twice.
Hardener
high quality, anti-yellowish. We have the Economic, Standard and High Solid content (HS) three types, and Fast Dry,Standard, Slow Dry three models. It is suitable for the 2K tinters, 2K ready mixed paint and clear coat.
Thinner
The thinner is s divided into Fast Dry, Standard and Slow Dry types. It is used in the 2K paint, 1K paint, clear coat, 2K primer, etc. It has good dissolution and promote bonding effect.
Other Additives
| Characteristic/Funtion | Mixing Ration/Usage | Spraying | |||||||||
| 2K Binder | can improve the gloss of the 2K solid color paint, and help leveling. | General adding amount is 20% of the 2K solid color paint. The mixing ration for the ready mixed 2K paint and hardener is 2 : 1. | |||||||||
| 1K Binder | To accelerate the 1K metallic paint film drying speed. To help the arrangement of the pearl & silver particles. To improve the application and adhesion between paint layers. | General addition is 0-25% of 1K metallic paint. Excessive addition will reduce the covering power of paint | |||||||||
| 1K Flop Control Agent | To change 1K pearl, silver paint particles’ arrangement, so that the paint film will be darker in the front, and more glitter in the side face. | To add more quantity, the silver side face will be whiter and more glitter. We suggest to add 5-25% of the total paint formula volume.
| |||||||||
| Fade-out Thinner | To help the old and new paint film to be one, and get a perfect repairing effect. Very easy application. | No need to dilute, just use directly. | After repairing, spray the Fade-out Thinner immediately on the interfaces area. After 15 seconds, spray once again. The spray gun pressure is suggested 2Bar. | ||||||||
| Antisilicone | Can repair the paint film’s shrinkage cavity which caused by the substrate’s contamination. | Repairing measures should be done before the imperfect paint film’s drying, and the spraying pressure is suggested 3-5Bar. | To add 1-2% Antisilione into the ready mixed paint which can be used directly. After stir evenly, to spray a layer on the unlevelling and imperfect paint film. | ||||||||
| Retarder | Slow down the drying time, make it easier to spray, leveling better, can prevent the paint film whitening at a relatively humid environment.
| At 25℃～40℃, can add 10%-50% Retarder into the slow dry thinner and use. Above 40℃, the Retarder can completely replace the thinner and use. | Used in the 1K metallic paint, 1K solid color paint, 2K solid color paint, 2K clear coat. | ||||||||
| Degreaser | Can remove oil and other impurities on the to-be-painted surface, to avoid unnecessary paint film defects. | To degrease before sanding. After sanding, degrease again, just to get a complete clean to-be-painted surface. | |||||||||
| Drying Additive | A kind of additive to speed up the drying time, special for 2K paint, Clear Coat used. To accelerate the drying time and improve efficiency.
| 1L paint can add 10g-20g Drying Additive.
| After adding the Drying Additive, the applicable time will be much shorter, so it has to be used out as soon as possible. | ||||||||
| Matte Black Primer | High blackness, fast dry, good adhesion to the top coat. | Matte Black Primer : NC Thinner = 1 : 1-1.2 | To spray 2-3 layers, and the flash off time between layers is 5-10 minutes. | ||||||||
| Matte Agent | It can reduce the paint film surface’s brightness, very good matting effect, and makes the paint film soft and smooth. It can be used in 1K or 2K paint system. |
|
1. Are you a factory or trade company?
A: We are a professional paint factory with 20 years'+ history. We produce the car paint mainly, and also the industrial paint, wood paint, plastic paint, etc. Except of the paint, we also can supply the car care accessories, like the undercoating, rubbing compound, spray gun, polishing pads, wool pads, abrasive paper, masking tape, filter, strainer, putty spatula, etc.
2. What is your car paint system?
A: We produce the acrylic car refinish paint, medium solid(MS) and high solid(HS)system.
3. What is the applicable range of your products?
A: car, truck, metal surface products, guardrail, billboard,etc.
4. Does your company can provide the samples to test? What is the minimum order quantity?
A: We can provide the samples for free. The minimum order quantity is 100cartons.
5. Does your company provide the after-sales service?
A: Yes, if there is a request, our engineers can visit the customers and provide the professional solution.
6. If I come to China, how can I find your factory and visit?
A: We warmly welcome your visit to our factory and company. Our driver can go to the airport or the appointed place to pick you up to our factory.
