|
[China]
Trade Verify
Address: No. 500, Keyuan road, Jinma town, Wenjiang district, Chengdu 611130, Sichuan, China
Contact name:David Du
LIBRE SCIENCE AND TECHNOLOGY CO.,LTD |
|
Verified Suppliers
|
|
|
Tungsten Carbide Circular Slitter Blades For Cutting Corrugated Paper Tobacco Metal Nonwovens Fabric
Size:
| Model | OD | ID | Thickness | Number of holes | Hole dia |
| Agnati | 220 | 115 | 1.0 | 3 | 9.0 |
| Agnati | 240 | 115 | 1.0 | 3 | 9.0 |
| Agnati | 240 | 115 | 2.0 | 3 | 9.0 |
| BHS | 240 | 32 | 1.2 | 2 | 8.5 |
| Fosber | 230 | 110 | 1.1 | 6 | 9.0 |
| Fosber | 230 | 135 | 1.1 | 6 | 9.0 |
| Fosber | 291 | 203 | 1.1 | 6 | 8.5 |
| Isowa | 260 | 140 | 1.1 | 6 | 9.5 |
| Marquip | 260 | 168.3 | 1.2/1.3 | 8 | 10.5 |
| Mitsubishi | 280 | 202 | 1.4 | 6 | 7.6 |
| Mitsubishi | 280 | 160 | 1.1 | 6 | 7.6 |
| Peters | 250 | 150 | 0.8 | ||
| Peters | 250 | 150 | 1.2 | ||
| TCY | 300 | 112 | 1.2-1.5 | 6 | 12.0 |
| Justu | 200 | 122 | 1.2/1.3 | ||
| Kaituo | 230 | 110 | 1.3/1.4 | ||
| Justo | 260 | 158 | 1.4/1.5 | 8 | 11.0 |
| Oranda | 265 | 112 | 1.4 |
Apply:
Packaging:
FAQ:
1. The short working life time of corrugated board knives.
Is the grain size of the grinding wheel proper?
Too coarse grain size of grinding wheel: make a short working life
time of knives
2. The edges of corrugated boards cut by knives with burr and dent
Please check the cutting edge of your blade. Is the cutting edge
keen enough
the corrugated board is too wet ?
3. Chips on the cutting edge after the grinding
1) Unstable swing grinding wheels may cause this problem ,even
break the knives
2) The strike of hard things may cause the chips on the cutting
edge
4.The edge of corrugated board is not straight
Unmatched strength of knives for the corrugated board with high
density
