|
[China]
Trade Verify
Address: No. 500, Keyuan road, Jinma town, Wenjiang district, Chengdu 611130, Sichuan, China
Contact name:David Du
LIBRE SCIENCE AND TECHNOLOGY CO.,LTD |
|
Verified Suppliers
|
|
|
Fosber Machine Tungsten Carbide Circular Razor Slitting Blade
Slitting blades for corrugated cardboard are manufactured with a
unique mirror finish that allows the razor slitters
to run cooler with less dragging and run cleaner with less starch build-up. When
customers have specific needs,
our corrugated paper cutting blade can be customized to match their requirement. And, because we have
extensive
industry knowledge, our clients have confidence that our carbide razor slitters will do an exemplary job
each and
every time. We manufacture carbide razor slitters for the following corrugated
paper making machine:
Agnati, Fosber, Isowa, Marquip, Peters etc.
Our knives can help you with the bellow THREE ASPECTS:
Circular Razor Slitting Blade Common Sizes:
| Model | OD | ID | Thickness | Number of holes | Hole dia |
| Agnati | 220 | 115 | 1.0 | 3 | 9.0 |
| Agnati | 240 | 115 | 1.0 | 3 | 9.0 |
| Agnati | 240 | 115 | 2.0 | 3 | 9.0 |
| BHS | 240 | 32 | 1.2 | 2 | 8.5 |
| Fosber | 230 | 110 | 1.1 | 6 | 9.0 |
| Fosber | 230 | 135 | 1.1 | 6 | 9.0 |
| Fosber | 291 | 203 | 1.1 | 6 | 8.5 |
| Isowa | 260 | 140 | 1.1 | 6 | 9.5 |
| Marquip | 260 | 168.3 | 1.2/1.3 | 8 | 10.5 |
| Mitsubishi | 280 | 202 | 1.4 | 6 | 7.6 |
| Mitsubishi | 280 | 160 | 1.1 | 6 | 7.6 |
| Peters | 250 | 150 | 0.8 | ||
| Peters | 250 | 150 | 1.2 | ||
| TCY | 300 | 112 | 1.2-1.5 | 6 | 12.0 |
| Justu | 200 | 122 | 1.2/1.3 | ||
| Kaituo | 230 | 110 | 1.3/1.4 | ||
| Justo | 260 | 158 | 1.4/1.5 | 8 | 11.0 |
| Oranda | 265 | 112 | 1.4 |
Circular Razor Slitting Blade Dispaly:
Application of Cardboard Cutting Blades:
F.A.Q.
1. The short working life time of corrugated board knives.
Is the grain size of the grinding wheel proper?
Too coarse grain size of grinding wheel: make a short working life
time of knives
2. The edges of corrugated boards cut by knives with burr and dent
Please check the cutting edge of your blade. Is the cutting edge
keen enough
the corrugated board is too wet ?
3. Break of knife
1) Improper assembly will cause the quick break of blades. Any
improper touch of the
blade is strictly prohibited during the working
2) Unstable swing grinding wheels break the knives, please check
the bearing of
grinding wheels.
3) Improper touch or strike with other hard things
4) Accident collision of knives.
4. Chips on the cutting edge after the grinding
1) Unstable swing grinding wheels may cause this problem ,even
break the knives
2) The strike of hard things may cause the chips on the cutting
edge
5.The edge of corrugated board is not straight
Unmatched strength of knives for the corrugated board with high
density
