|
[China]
Trade Verify
Address: No. 500, Keyuan road, Jinma town, Wenjiang district, Chengdu 611130, Sichuan, China
Contact name:David Du
LIBRE SCIENCE AND TECHNOLOGY CO.,LTD |
|
Verified Suppliers
|
|
|
Corrugated Paper Slitter Machine Circular Blades and Grinding
Stones
This slitting blade for corrugated cardboard is of OD280, ID158 and
Thickness 1.4mm, and made of tungsten
carbide. Suitable grinding stone-50x16x10mm. Carbide with high wear
resistance, high strength, fatigue
resistance, super hardness is better than any steel and has a
service time several times longer than general
steel material. If you are looking for carbide slitters for
cardboard which greatly reduce your machine downtime
and ensure your consecutive running production, please contact us!
Our knives can help you with the bellow THREE ASPECTS:
Corrugated Paper Circular Blade Common Sizes:
| Model | OD | ID | Thickness | Number of holes | Hole dia |
| Agnati | 220 | 115 | 1.0 | 3 | 9.0 |
| Agnati | 240 | 115 | 1.0 | 3 | 9.0 |
| Agnati | 240 | 115 | 2.0 | 3 | 9.0 |
| BHS | 240 | 32 | 1.2 | 2 | 8.5 |
| Fosber | 230 | 110 | 1.1 | 6 | 9.0 |
| Fosber | 230 | 135 | 1.1 | 6 | 9.0 |
| Fosber | 291 | 203 | 1.1 | 6 | 8.5 |
| Isowa | 260 | 140 | 1.1 | 6 | 9.5 |
| Marquip | 260 | 168.3 | 1.2/1.3 | 8 | 10.5 |
| Mitsubishi | 280 | 202 | 1.4 | 6 | 7.6 |
| Mitsubishi | 280 | 160 | 1.1 | 6 | 7.6 |
| Peters | 250 | 150 | 0.8 | ||
| Peters | 250 | 150 | 1.2 | ||
| TCY | 300 | 112 | 1.2-1.5 | 6 | 12.0 |
| Justu | 200 | 122 | 1.2/1.3 | ||
| Kaituo | 230 | 110 | 1.3/1.4 | ||
| Justo | 260 | 158 | 1.4/1.5 | 8 | 11.0 |
| Oranda | 265 | 112 | 1.4 |
Carbide Slitter Knives Display:
Application of Cardboard Cutting Blades:
F.A.Q.
1. The short working life time of corrugated board knives.
Is the grain size of the grinding wheel proper?
Too coarse grain size of grinding wheel: make a short working life
time of knives
2. The edges of corrugated boards cut by knives with burr and dent
Please check the cutting edge of your blade. Is the cutting edge
keen enough
the corrugated board is too wet ?
3. Break of knife
1) Improper assembly will cause the quick break of blades. Any
improper touch of the
blade is strictly prohibited during the working
2) Unstable swing grinding wheels break the knives, please check
the bearing of
grinding wheels.
3) Improper touch or strike with other hard things
4) Accident collision of knives.
4. Chips on the cutting edge after the grinding
1) Unstable swing grinding wheels may cause this problem ,even
break the knives
2) The strike of hard things may cause the chips on the cutting
edge
5.The edge of corrugated board is not straight
Unmatched strength of knives for the corrugated board with high
density
