Computer Die-Cutting Slotting Machine For Bulk Orders (Quick
One-Click Order Change)
Computer Die-Cutting Slotting Machine For Bulk Orders (Quick
One-Click Order Change)
Functions and characteristics:
■ An alarm bell is attached to the clutch of the electric control
machine, and a friction clutch is attached to the transmission
shaft, so as to avoid damaging the machine due to misoperation.
■ Pneumatic interlocking device. The frequency conversion control
of main engine is attached with motor starting protection device.
■ Chinese invention patent technology: extended servo pressureless
leading edge paper feeding: multiple rows of paper feeding wheels,
each row of paper feeding wheels is independently driven by a servo
motor, which realizes extended paper feeding and greatly improves
the compression resistance of cartons. Negative pressure suction
assists paper feeding, which can adjust vacuum negative pressure
value by frequency conversion according to different bending
conditions of paperboard, ensuring smooth paper feeding in various
types and directions.
■ The rear end of the machine is equipped with interlocking control
switch to control the paper feeding in emergency stop. It is
controlled by servo controller, which can move quickly and save
effort.
■ Electric adjustment of left and right side baffles and rear gear
box positions; Synchronous adjustment of front baffle clearance.
Separate sheet feeding device (continuous or separate sheet feeding
can be selected as required).
■ The touch screen can control: automatic plate correction, order
memory storage, paper supply counter setting, production quantity
display and automatic paper alignment.
■ the gap of paper feeding roller can be adjusted by both electric
and computer, and the adjustment range is 0 ~ 12mm.
■ The paper feeding part and the die cutting groove part are
automatically zeroed in an electric way. With the automatic zeroing
device, the second sheet can be adjusted to the correct position to
reduce the waste of cardboard.
■ Die cutting department (plate-free slotting computer adjustment
structure)
■ Cast steel material for die roll, high-speed dynamic balance
correction, increased running stability, high-frequency quenching,
grinding and hard chromium plating on the surface.
■ The distance between fixing screw holes of the cutter die is
100×50mm, and the applicable height of the cutter die is 25.4 mm
■ thickness of wooden formwork: 16 ~ 18mm (for three-layer board)
13 ~ 15mm (for five-layer board).
■ Excellent rubber pad roll cast steel material, high-speed dynamic
balance correction, increased running stability, surface grinding,
hard chromium plating,
■ Electric adjustment of the gap with the die roller, imported
original superior rubber pad, mechanical transverse ±30mm traveling
device, and automatic compensation of linear speed by die-cutting
equalizer can make the die-cutting rubber pad wear evenly and
prolong its service life.
■ Planetary gear structure, electric digital 360 adjustment of
die-cutting phase (both operation and stop can be adjusted),
electric adjustment of transverse position, and adjustment distance
of 7 mm.
■ Pre-pressing, forming and slotting knife edges are adjusted
synchronously with one key by computer.
■ Special-shaped die-cutting board can be used interchangeably with
cutting groove without die (specific parameters are determined
through negotiation according to actual conditions).