Heavy Duty Drive And Double Facer Machine Of Cardboard Production
Line
Heavy duty drive:
1. The upper and lower driving rollers are cast with vulcanized
rubber, and the surfaces are engraved with herringbone grooves,
which are wear-resistant and have a long service life, and have a
medium height to ensure the smooth output of cardboard;
2. Double-shaft transmission, independent reduction box of upper
and lower rubber wheels, easy maintenance;
3. Double motors of upper and lower rubber wheels control
synchronization to ensure high synchronization of upper and lower
belt speeds;
Double facer machine:
1. A complete set of new energy-saving and rapid temperature rise
and fall cavity tube type hot plate, with S-shaped gyration, double
entry and double exit, fast steam flow rate, rapid heat exchange
and timely discharge of condensed water;
2. The hot plate is fixed by locking one end and swimming the other
end, which effectively reduces the upper surface camber caused by
thermal deformation of the hot plate;
3. The paper inlet matching paper heating arc-shaped guide board,
the inner paper heating arc-shaped plate and the paper inlet sharp
spraying mechanism improve the temperature of the cardboard during
bonding;
4. The frame adopts H steel stacking design and is equipped with a
bottom frame, which is not easy to deform;
5. Sail belt high support type;
6. The machine body is assembled in sections, with convenient
transportation and installation and accurate positioning;
7. Built-in hydraulic lifting mechanism;
8. Operate the side sealing plate for protection, and prevent the
heat from radiating outwards, with beautiful appearance;
9. The driving side is equipped with a protective net to reduce the
danger of being scalded by the pipeline;
10. The upper sail belt gear rack is tensioned synchronously; The
lower sail belt screw is tensioned, and the adjustment is labor
saving;
11. The upper sail belt and the lower sail belt are equipped with
airbag type automatic deviation correction mechanism;
12. The steam pipeline layout is reasonable, which can realize the
grouping temperature adjustment of hot plates;
13. All hot plates, pressure rollers and tension rollers are plated
with hard chromium, which is wear-resistant and rust-proof;