|
[China]
Trade Verify
Address: F4, Building#1, Shijihuayuan, Dagang, Binhai New Area, Tianjin, China 300270
Contact name:SAM BIN
MKarte Material Technology (Tianjin) Limited |
|
Verified Suppliers
|
|
|
Transparent PVC Coated Overlay With Strong Adhesion Level for digital printing
1. Transparent PVC Coated Overlay With Strong Adhesion Level for digital printing- Introduction
PVC Coated Overlay MCO-W model is suitable for laminating with most PVC sheets printed by
various printers. It features high adhesion, no color change and
deformation.
It is applicable to almost all sheets printed by various ink. It
features excellent peeling strength and long aging time.
Strong adhesive coated overlay for card
1).Glue Type: Water based.
2).Thickness range: 40-100 Micron
3).Roughness: Both sides matte
4).Inner Core Diameter: 3"(76mm)
Descriptions :
Overlay with a layer of thermal glue on the surface, thus PVC printing sheet can stick fast with the core sheet. It’s essential function is to be covered on PVC cards from top to bottom. With the help of heating and pressure from laminator, overlay and core will strongly stick to each other, and form a very bright surface on the card
Characteristic:
Various type coated overlay can be laminated well with inkjet core, offset core, digital printing core (HP Indigo, MGI DP 60, Xerox)
2. Transparent PVC Coated Overlay With Strong Adhesion Level for digital printing- Technical parameters
Parameters:
| Size | in reel or sheet, A4, A3 or as per customer requirements |
| Normal thickness | 0.04,0.05,0.06,0.08,0.10mm |
| Color | transparent with one-side glue coating. |
| Package method | by reel or 500 sheets per bag/4-8 bags per paper carton, or as per customer requirements. All the cartons are firmly piled up and fixed on the solid plywood pallet. |
| Storage condition | Sealed, moisture-proof, room temperature under 40℃, Keep it horizontally, avoid heavy pressing and direct sunlight. |
Technical Parameters:
| Item | Parameters |
| Vicat softening point | 72±2 ℃ |
| Heating Shrinkage ratio | ≤10 % |
| Tensile Strength | ≥40 MPa |
| Normal thickness in mm | 0.04,0.05,0.06,0.08,0.10 |
| Peel Strength (90°, 300mm/min) | ≥6.0 N/cm |
| Aging time (65℃ temp./95% humidity ) | ＞200 hours |
| Suitable ink | offset and silk screen printing UV ink, Pigment and dye ink for inkjet printing as well as digital printing ink |
3. Transparent PVC Coated Overlay With Strong Adhesion Level for digital printing- Application
It has high peel strength with electronic ink, small lamination discoloration, not easy to cause deformation, and wide application.
It is mainly used for various magnetic stripe cards, phone cards, membership cards and other PVC cards, adhesive force is more than 3.5N. .
4. Transparent PVC Coated Overlay With Strong Adhesion Level for digital printing- Packing
| Product Test Report | ||||||
| Product Name:Normal PVC coated overlay | ||||||
| SN | Inspected items | Unit | Inspection standard | Test result | ||
| 1 | Fabric width | mm | ±1 | OK | ||
| 2 | Length | mm | ±1 | OK | ||
| 3 | Width | mm | ±1 | OK | ||
| 4 | Thickness | mm | ±10% | OK | ||
| 5 | Squareness | mm | ≤1 | 0.3 | ||
| 6 | Density | g/cm3 | 1.25±0.05 | 1.26 | ||
| 7 | Pulling Strength | MD | MPa | ≥40 | 42 | |
| CD | ≥35 | 40 | ||||
| 8 | Heating Shrinkage rate | MD | % | ≤+30 | 26 | |
| CD | ≥-45 | -42 | ||||
| 9 | Vicat softening point | ℃ | 76±4 | 75.8 | ||
| 10 | peeling strength | N | ≥3.5 | 4.9 | ||
| 11 | Surface quality | The surface is flat without wrinkles, holes or glue drops, and the color is correct. | ||||
