|
[China]
Trade Verify
Address: F4, Building#1, Shijihuayuan, Dagang, Binhai New Area, Tianjin, China 300270
Contact name:SAM BIN
MKarte Material Technology (Tianjin) Limited |
|
Verified Suppliers
|
|
|
0.08mm A3 Size PVC Coated Overlay For PVC Card Body Material
1.Introduction of 0.08mm A3 Size PVC Coated Overlay For PVC Card Body Material
PVC Coated Overlay MCO-W model is suitable for laminating with most
PVC sheets printed by various printers. It features high adhesion,
no color change and deformation.
It is applicable to almost all sheets printed by various ink. It
features excellent peeling strength and long aging time.
it is developed specially for Inkjet printer Ink. It’s suitable for laminating with the sheets which printed by whole series of Inkjet presses. It provides excellent peel strength and no deformation or color change after lamination.
Using Method
Laminate with Inkjet printed sheet directly.
Characteristics:
1. Excellent stable quality
2. Special formulation according to each client's requirement
3. Exact sheet size cutting and thickness control
4. Low dust
5. Low static
6. Adjustable Vicat degree
7. Less than15 days Short Lead Time
8. Perfect packaging for transportation
9. Best after sell service
2.Parameters of 0.08mm A3 Size PVC Coated Overlay For PVC Card Body Material
| Item | Parameters | |
| Surface | Clean and flatness | |
| Dimensional Tolerance (mm) | ±1 | |
| Angle Cut Tolerance (mm) | ±1 | |
| Diagonal Difference (mm) | ≤1 | |
| Thickness Tolerance (mm) | ±10% | |
| Vicat (℃) | 72±2 | |
| Shrinkage | MD | ≥ - 40% |
| TD | ≤15% | |
| Tensile Strength (MPa) | MD | ≥35 |
| TD | ≥35 | |
* Customers' design can be accepted.
3.More Description of 0.08mm A3 Size PVC Coated Overlay For PVC Card Body Material
A.Detailed Product Description
1).Thickness Range: 0.04-0.10MM
2).Finish: Matt
3).Size: Customized Roll size or Sheet size
4).High initial stick
B.Manufacture Method
1). Put printing core and two overlay together, then put into the laminator, the temperature is determined as per the instruction of the machine , Pls be noticed that all glue sides of both pvc sheets and overlay are put inward.
2). The lamination usually lasts 10-15minutes ,The pressure is 6-8Mpa, The temperature is 120-140°C
3). Cut the card
| Product model | Product name | Thickness Range mm | Color | Vicat ℃ | dynes/cm | Apparent density g/cm3 | Peel strength N/cm | Main application |
| PVC coated overlay | General coated overlay
| 0.04~0.10 | Transparent | 72-76 | 34~44 | 1.12~1.30 | / | It is mainly used for various magnetic stripe cards, phone cards, membership cards and other PVC cards, adhesive force is more than 3.5N. . |
