|
[China]
Trade Verify
Address: F4, Building#1, Shijihuayuan, Dagang, Binhai New Area, Tianjin, China 300270
Contact name:SAM BIN
MKarte Material Technology (Tianjin) Limited |
|
Verified Suppliers
|
|
|
Non-laminating inkjet PVC sheet MNI-3 ( Dragon card sheet size: 0.15mm+0.46mm+0.15mm )
1.Non-laminating inkjet PVC sheet MNI-3 ( Dragon card sheet size: 0.15mm+0.46mm+0.15mm )- Introduction
Non-laminating inkjet PVC sheet (Dragon card sheet) is known as the most economic material solution for normal card production. There are three sheets in one set including 2 transparent printing sheets (sheet A) plus 1 middle white core sheet (sheet B).
2.Non-laminating inkjet PVC sheet MNI-3 ( Dragon card sheet size: 0.15mm+0.46mm+0.15mm )- Features
The recommended card production procedures are detailed as below:
1). Print the image on the two sheets A with inkjet printer
(remember to choose “mirror printing”), wait and let the ink dry up
completely (normally around 5-10 minutes)
2). Remove the protection films on the middle core sheet, put the
printed sheets right on both sides of the middle core sheet, then
let it go through the rolling laminator (set temperature around
150℃-180℃)
3). Cut the laminated sheet into standard card, remove the
protection film from the surface of the card.
3.Non-laminating inkjet PVC sheet MNI-3 ( Dragon card sheet size: 0.15mm+0.46mm+0.15mm) - Product parameters:
| Sheet size | 200mmx300mm |
| Sheet thickness per set | T1) 0.15mm+0.46mm+0.15mm(A+B+A) T2) 0.15mm+0.60mm+0.15mm(A+B+A) T3) 0.25mm+0.46mm+0.25mm(A+B+A) A: transparent inkjet printing sheet B: white pvc core sheet |
| Package method | 50 sets per carton |
4.Non-laminating inkjet PVC sheet MNI-3 ( Dragon card sheet size: 0.15mm+0.46mm+0.15mm )- Usage Step:
5.Non-laminating inkjet PVC sheet MNI-3 ( Dragon card sheet size: 0.15mm+0.46mm+0.15mm )- Packing
