|
[China]
Trade Verify
Address: F4, Building#1, Shijihuayuan, Dagang, Binhai New Area, Tianjin, China 300270
Contact name:SAM BIN
MKarte Material Technology (Tianjin) Limited |
|
Verified Suppliers
|
|
|
Textured Galvanized / Patterned Card Lamination Steel Plate used in card laminator
(it also named as: card lamination steel plate, laminator steel plate, textured laminating steel plate, special pattern lamination plate, card finish lamination plate, card production material )
1.Textured Galvanized / Patterned Card Lamination Steel Plate used in card laminator- Introduction:
Special pattern lamination steel plates are mainly used for personalized pattern finish card lamination. It can well ensure perfect plastic card surface finish after lamination. Our plates are being widely used by many card factories in both China and foreign countries worldwide
2.Textured Galvanized / Patterned Card Lamination Steel Plate used in card laminator- Key Features:
1). One side (pattern side) is covered with protection foils (blue thin films) to ensure good protection.
2). Only one side has the special pattern and another side has no pattern which will not contact the card surface in laminator. .
3). There are no scratches and dust on pattern surface and possibly there is slight scratch on another non-pattern side.
4). The edges are smooth and deburred with the round curved corners.
3.Textured Galvanized / Patterned Card Lamination Steel Plate used in card laminator- Technical Parameters:
| Thickness range | 0.8 mm (Thickness tolerance: ±0.05mm) |
| Dimension tolerance | ±1mm |
| Plate size(L×W) | A4, A3 or custom-made size |
| Plate flatness level | maximum 1 mm |
| Surface pattern | special pattern |
| Surface hardness | HRC80±20 |
| Thermal transmission | 0.04cal/℃.cm.sec at 20℃ |
| Edge state | smooth and deburred with the round curved corners |
| Packaging box | solid plywood carton with soft cushion protection inside. |
4.Textured Galvanized / Patterned Card Lamination Steel Plate used in card laminator- Application
Plate size(L×W): A4, A3 or custom-made size
Plate thickness: 0.8 mm (Thickness tolerance: ±0.05mm)
Dimension tolerance: ±1mm for length and width.
Plate flatness level: maximum 1 mm.m
Surface pattern: special pattern
Surface hardness: HRC80±20
Thermal transmission: 0.04cal/℃.cm.sec at 20℃
Packaging box: solid plywood carton with soft cushion protection inside.
5.Textured Galvanized / Patterned Card Lamination Steel Plate used in card laminator- Packing
Detailed Product Description
1).Surface:Embossed
2).Thickness:800 Micorn
3).Type:Card laminator Accessories
4).Characteristic:Heat-resistant,high elasticity
Description
We use good quality stainless steel to produce all kinds of finishes such as Mirror, Matt, Embossing and silk finish etc…
Package method: solid plywood carton with soft cushion protection inside.
