Active Member
|
[China]
Address: location:No.407,4th floor,unit2,building 1,401sheng'an street,chengdu high-tech zone,China(Sichuan)pilot free trade zone
Contact name:yuan
Sichuan keluosi Trading Co., Ltd |
|
|
CNC Carbide Small hole inner diameter grooving blade 9GR200 For Cutting Off
Feature Advantage:
| model | L1(mm) | L2(mm) |
| 6GR | 6.44 | 4.76 |
| 7GR | 7.36 | 5.56 |
| 8GR | 10.16 | 6.35 |
| 9GR | 12.95 | 6.35 |
Technical information :
Slotting and separation are unique turning applications for many
machining applications that require special tools. These tools can
be regarded as the extension of ordinary turning to some extent.
Slotting and separating operations should consider three different
aspects to determine the best method and mold solution:
Features of parting and grooving workpiece:
Analysis of groove size and quality requirements to be processed:
processing type, groove depth, groove width, outer radius and
quality requirements.
Workpiece material, shape and quantity.
Whether the material has good chip breaking performance
Production batch: single or batch slotting
Whether the workpiece can be clamped safely
Chip removal
Machine parameters.
Stability, power and torque, especially for large components
Cutting fluid and coolant
Whether the long chip material needs high-pressure coolant to break
chips
Speed limit
Use all possible support
Timely replacement of worn blades will make the cost of new blades
more economical than that of excessively worn blades.
Replace worn or damaged rods.
Don't try to repair the turret.
This type of knife has the following characteristics:
(1) The blade is not welded at high temperature, which avoids the
defects such as hardness reduction and crack of the blade caused by
welding, and improves the durability of the tool.
(2) As the tool durability is improved, the service time is longer,
the tool change time is shortened, and the production efficiency is
improved. (3) The cutter bar can be reused, which not only saves
steel but also improves the utilization rate of the blade. The
blade is recycled by the manufacturer, which improves the economic
benefits and reduces the cost of the tool.
(4) After regrinding, the size of the blade will gradually
decrease. In order to restore the working position of the blade,
the adjustment mechanism of the blade is often set on the turning
tool structure to increase the number of regrinding of the blade.
(5) The end of the pressing plate used for pressing the blade can
act as a chip breaker.
