Active Member
|
[China]
Address: No.88 Kaide Road, Hetang District, Zhuzhou City, Hunan Province, China
Contact name:Lynn Zhang
Benemetal Material Technology Co.,Ltd |
|
|
HRC91-93.5 Indexable Turning Inserts Cemented Carbide Cutting Tool Grey Color
Carbide Indexable Turning Inserts
Solid carbide provides better rigidity than high speed steel. It is
extremely heat resistant and used for high speed applications on
45steel, cast iron, nonferrous materials, plastics and other
tough-to-machine materials.
The Key products we selling as below:
--Carbide Inserts:turning inserts,threading inserts, milling
inserts,grooving inserts..
--Turning Tool:external turning,boring bar turning, threading
turning...
--End Mills: Carbide,, Rough End Mills, Round Tool Bits
--Milling Tool:high feedrate face mill, round dowel face mill, end
mill shank..
--Drill bits:solid carbide step drills, twist drill, hss drill,
indexable high speed drill
--Hand Taps&Carbide saw blade
--Rotating tool system:JT/BT/ST/HSK/DAT
Features and benefits
1. Up to 30% higher productivity and profitability.
2. Coated suface enable to get longer tool life.
3. Good abrasion resistance and toughness
GRADE TABLE
| Grade | Coated | Application |
| YBC151 | CVD | P05-P20, finishing of P-type material |
| YBC152 | CVD | P05-P20, finishing of P-type material |
| YBC251 | CVD | P10-P30, semi-finishing of P-type material |
| YBC252 | CVD | P10-P35, semi-finishing of P-type material |
| YBC351 | CVD | P20-P40, roughing of P-type material |
| YBM151 | CVD | M05-M30, finishing, semi-finishing and roughing of M-type material |
| YBM153 | CVD | BEST CHOICE for Roughing of M-type material |
| YBM251 | CVD | M10-M30, semi-finishing and roughing of M-type material |
| YBM253 | CVD | M10-M35, semi-finishing and roughing of M-type material |
| YBD052 | CVD | K05-K15, finishing of K-type material, esp. for high speed dry machining of gray cast iron |
| YBD102 | CVD | K05-K20, finishing of K-type material, esp. for high speed machining of Nodular cast iron |
| YBD151 | CVD | K05-K25, finishing of K-type material, semi-finishing of K-type material |
| YBD152 | CVD | K05-K25, finishing and semi-finishing of K-type material |
| YBD252 | CVD | K15-K35, semi-finishing and roughing of K-type material |
| YBG102 | PVD | K01-K10, S10-S20, finishing of K.S-type material |
| YBG105 | PVD | finishing and semi-finishing for materials difficult to cut |
| YBG202 | PVD | P10-P30, M10-M30, K10-K20, S20-S30, semi-finishing of P, M, K-type material; Roughing of S-type material |
| YBG205 | PVD | M05-M30, semi-finishing and roughing of M-type material |
| YBG302 | PVD | P10-P40, M10-M30, K20-K40, S20-S30, semi-finishing and roughing of P.M.K.S-type material |
| YNG151 | Uncoated Cermet | P05-P20, M05-M20, K05-K20, wide application in finish machining of P. M. K-type material |
| YNG151C | Coated Cermet | P01-P20, M01-M20, K01-K20, wide application in finish machining of P. M. K-type material |
| YC10 | Cemented | P05-P20, finishing of P-type material |
| YC40 | Cemented | P20-P40, rouging of P-type material |
| YD051 | Cemented | K05-K15, finishing of K-type material |
| YD101 | Cemented | N05-N30, S05-S15, finishing and semi-finishing of H-type material, finishing of S-type material |
| YD201 | Cemented | K10-K35, semi-finishing and rouging of K-type material |
ADVANTAGES of SHIELD
Features:
1. Large production and reliable after service
2. Best technical assistance
3. High hardness, High efficiency, high stability
4. Professional inspection and high precision
5. High precision, easy replacement, general use
6. Moderate price, good quality, short delivery time
7. Support OEM service
