HRC55 Enough Stock Standard Size Carbide Corner Rounding Radius End
Mill
What's The Appearance Of HRC55 Corner Radius End Mill ?
-----All Pictures Are 100% Real Shot .
![](http://img.everychina.com/nimg/5f/1b/a878e1260e793c40ca30500fddb5.jpg)
hardness | 45/50/55/58/60/65/70 |
diameter | D1-20mm |
Cutter length | 3mm-45mm |
Overall length | 50mm-100mm |
Shank diameter | 4mm-25mm |
flute | 4 |
type | flat end mill |
Helix angle | 35 degree |
Workpiece material | Steel, mould steel, low alloy, hardened steel, staninless steel,
alloy steel |
Hardness / HRC50 | Wc=90% Co=10% HV30=1571 TRS=3750N/mm2 HRA=91.8 Grain Size=0.6 µm |
Hardness / HRC55 | Wc=88% Co=12% HV30=1700 TRS=4000N/mm2 HRA=92.2 Grain Size=0.4 µm |
Hardness / HRC60 | Wc=87% Co=13% HV30=1700 TRS=4000N/mm2 HRA=93.2 Grain Size=0.4 µm |
Hardness / HRC65 | Wc=92% Co=8% TRS=3800N/mm2 HRA=93.6 Grain Size<0.3 µm |
Hardness / HRC65 | Wc=91% Co=9% HV30=1950 TRS=4000N/mm2 HRA=93.9 Grain Size=0.2 µm |
What's The Diameters Of Carbide Corner Radius End Mill ?
-----If Demand Diameters Are Not In The List, We Can Customized .
![](http://img.everychina.com/nimg/f0/28/9e3b8b870166bdb251d2c7285611.jpg)
![](http://img.everychina.com/nimg/6d/79/8244cdeda364f359f64661686565.jpg)
![](http://img.everychina.com/nimg/4e/e7/514d144f68d7ee6da5b8cb82415e.jpg)
What's The Carbide Thread Rough End Mill Application ?
-----We Make A Explain To You, Further Our Engineer Can Give
Application Suggestion.
![](http://img.everychina.com/nimg/68/75/5aa9d7d7f5877006aa31befe7bde.jpg)