Home Companies Zhuzhou Zonco Sinotech Wear-resistant Material Co., Ltd.

Fluid System ZK06 Control Valve Parts For Flow Control

Active Member

Contact Us

[China]

Address: Building A3,Minor Enterprises Promotion Park,Huanghe Road(N),Tianyuan District,Zhuzhou,Hunan,China.

Contact name:Dora

Zhuzhou Zonco Sinotech Wear-resistant Material Co., Ltd.

Fluid System ZK06 Control Valve Parts For Flow Control

Country/Region	china
City & Province	zhuzhou hunan
Categories	Valves

Product Details

Control Valve Parts Mechanical Devices In Fluid Systems Used To Control Flow

Trim

The internal components of a valve that modulate the flow of the controlled fluid. In a globe valve body, trim would typically include the plug, seat ring, cage, stem, and stem pin.

Cage

A part of a valve trim that surrounds the plug and can provide flow characterization and/or a seating surface. It also provides stability, guiding,balance, and alignment, and facilitates assembly of other parts of the valve trim.The walls of the cage contain openings that usually determine the flow characteristic of the control valve.

Plug

The part of the valve that is positioned in the flow path to modify the rate of flow through the valve.

Seat Ring

A part of the valve body assembly that provides a seating surface for the plug and can provide part of the flow control orifice.

Valve Stem

In a linear motion valve, the part that connects the actuator stem with the plug.

Yoke

The structure that rigidly connects the actuator power unit to the valve.

Common Alloy Grades, Ghysical Mechanical Properties And Recommended Application
Grade	WC%	Co/Ni %	Physical and mechanical properties			Grain size (μm)	Recommended application
Grade	WC%	Co/Ni %	Density (g/cm3)	TRS (N/mm²)	Hardness (HRA)	Grain size (μm)	Recommended application
ZG01	100	0	15.3-15.5	1200	95.5	0.3	Ultra-high hardness, high wear resistance, anti-corrosion, with certain anti-destructive ability
ZG04X	96	4	15.0-15.2	1600	92.8	0.8-1.0	Suitable for drawing die, non-ferrous metal wire drawing and wear-resistant parts
ZG06	94	6	14.8-15.1	2500	90.0	1.2	Good abrasion resistance, good compression resistance, suitable for wear-resistant parts that resist abrasion and high pressure.
ZG06X	94	6	14.8-15.1	2400	91.5	1.0	Superio wear resistance,good comprehensive properties,suitable for making non-standard structure components with higher wear resistance.
ZG06A	94	6	14.8-15.1	2150	92.5	0.6-0.8
ZG08	92	8	14.6-14.9	2700	89.0	1.2-1.6	Good general performance, used for general wear parts, molds, general tools, etc.
ZG10.2	90	10	14.3-14.6	3800	91.7	0.7	Good general performance, suitable for casing and oil nozzle products
ZG11	89	11	14.3-14.7	2800	88.5	1.2-1.6	Anti-wear, anti-erosion, good comprehensive mechanical strength, suitable for wear-resistant parts in the petroleum, chemical and mechanical industries.
ZG12X	88	12	14.2-14.5	3000	89.5	1.0-1.2	Anti-erosion, good comprehensive mechanical strength, suitable for impact-resistant wear-resistant parts, molds, and roller rings.
ZG15	85	15	13.8-14.2	3000	86.5	1.2-1.6
ZG15X	85	15	13.8-14.2	4500	89.0	0.7	Excellent wear resistance and toughness,it is suitable for making integral stamping dies, anti-vibration toolholders, etc.
ZG20	80	20	13.4-13.8	3100	85.0	1.0	Excellent wear resistance and toughness
ZN06	94	6	14.5-14.9	2000	90.0	1.2	Non-magnetic alloy, suitable for sealing ring, non-magnetic wear-resistant parts and corrosion-resistant parts.
ZN09	91	9	14.3-14.6	2300	89.0	1.2-1.6
ZN11	89	11	14.0-14.3	2600	88.0	1.2