Guangdong Rich Packing Machinery Co., Ltd. |
Verified Suppliers
|
|
NJP Capsule Filling Machine Full Automatic For Powder Pellet Pharmaceutical
capacity | 24,000 pcs/h |
Net weight of machine | 600.00 Kg |
Overall size of machine | 805×705×1760(mm) |
Power | 100-400V 50/60Hz |
Total power | 3.5KW |
Vacuum | 20m3/h-0.04-0.08Mpa |
Noise | <75DB(A) |
Applicable capsule | 00,0,1,2,3,4,5# |
Applicable product | Power,granule,pellet,tablet |
NJP Powder Capsule Filling Machine 400C NJP is easy to clean, 0
dirt is one of its strengths, it is very environmentally friend and
very economical. This machinery can work efficiently from morning
to night under the conditions of continuous working, and it can run
with no noise. So, all kinds of fill rods are easy for changing and
have 0 deviation to ensure the quality of the capsules without any
damage.
The adjustment working and war of the gap between the dosing disc
and the sealing ring of the automatic hard capsules filling
machine. The gap between these dosing disk and the sealing rings of
the automatic capsule filling machine are 0.03 to 0.08mm. When the
powder granules are large, the interval can be adjusted to be
bigger . If the gaps are too small, the resistance between the
dosing disk and the sealing ring would increase. During the
operating of the fully automatic capsule filling machinery, it is
necessary to adjust the gap when too much powder leakage.
Automatic filling capsule machine adjustment method: loosen and
remove the 5 screws on the baffle, turn the five adjusting bolts
evenly and careful in turn to adjust the height of the sealing
rings, check it with the feeler gauge For gaps, check three to five
measuring points, the gaps at every point should be consistent, and
make sure that the five adjusting sleeves are in contact with the
sealing ring.