3-Piece Tin Can Induction Drying Oven For Can Body Making Machine
Line
After repeated testing, research and transformation, the main
feature of this machineis energy saving. Each burner needs only
1-2KW, easy to operate.
It uses Japanese Omron color touch control terminal (touch screen),
Japanese OmronPLC programmable controller, Japanese Omron
intermediate relay; French Schneiderinverter, French Schneider
contactor and so on.
The transmission supporter adopts a special custom-made heavy-duty
aluminumalloy; it is also equipped with an imported wear-resistant
belt with no seam beltthe aluminum alloy and the imported belt
contact surface is attached with awear-resistant strip of 1mm to
reduces friction to improves durabilityThe conveying adopts the
lower conveying type, which is easy to operate and ensuresthat the
distance between the weld and the furnace head is unchanged. lt
only heatsthe repair area and does not generate heat around the
periphery. Each burner can beset intelligently and heated
individually or continuously.
-Stepless speed regulation
-Adjustable in conveying speed
-Applicable for different sizes of can bodies
-Only need to change height of conveyor for changeover of can
sizes.
Burner power | 1-2KW |
Burner heating speed | 4m-7m/min |
Suitable small can diameter | φ45mm-φ176mm |
Suitable big can diameter | φ176mm-φ350mm |
Can height | 45mm-600mm |
Cooling water | >0.4MPa,12-20℃,40L/min |
Air consumption | ≥50L/min>0.5Mpa |
Conveyed by Single belts(sutomatic lifting) Range of can diameter
:Φ45mm-Φ180mm
Conveyed by updraft double belts Range of can diameter
:Φ200mm-Φ350mm
Conveyed by lower double belts(sutomatic lifting) Range of can
diameter :Φ153mm-Φ300mm
Welding seam downwards,conveyed by double belts