|
[China]
Trade Verify
Address: Wujin Changzhou Jiangsu China
Contact name:Kenny
Changzhou Bluen Bearing Co.,Ltd |
|
Verified Suppliers
|
|
|
MZ Series MZ45 One Way Bearing Cam Clutch
Features of MZ Cam Clutch
1. MZ Series Cam Clutch is Shielded by shield bearings on both ends, packed with a special grease, and are ready for use.
No additional lubricant is required.
2. For attaching pulleys, gears or sprockets to the clutches, insert hubs (with f7 tolerance of ISO R773) along the inner surface of the outer race and screw the bolts (high tension) into the tapped holes on the clutch end.
3. External thrust load should be supported by other devices, not by the Cam Clutch.
4. Use only a parallel key to secure the clutch to the shaft. Do not use a tapered Key.
5. When mounting the clutch onto the shaft, apply pressure to the inner race but never to the outer race.
| Model | Torque capacity (Nm) | Drag Torque (Nm) | Max Overrunning(r/min) | Max indexing (cycle/nin) |
Bore size | A | C | B | F |
(M6) | G | PCD D | S | H-M No.of Tapped Holes ×Size ×Pitch | Weight (kg) | ||
Inner race | Outer race | Dia. (H7) | keyway | ||||||||||||||
| MZ15 | 186 | 0.2 | 2200 | 900 | 150 | 15 | 5×2.3 | 62 | 60 | 68 | 25 | 47 | 5.5 | 58 | 10 | 6-M5×0.8 | 1.4 |
| MZ17 | 215 | 0.2 | 2000 | 800 | 150 | 17 | 5×2.3 | 66 | 64 | 75 | 28 | 52 | 6.3 | 64 | 10 | 6-M5×0.8 | 1.8 |
| MZ20 | 323 | 0.29 | 1900 | 700 | 150 | 20 | 6x2.8 | 67 | 65 | 80 | 30 | 55 | 7.6 | 68 | 12 | 6-M6×1.0 | 2.0 |
| MZ30-22 | 735 | 0.39 | 1800
| 500 | 150 | 22 | 6x2.8 | 82 | 80 | 100 | 45 | 75 | 8.9 | 88 | 16 | 6-M8×1.25 | 3.7 |
| MZ30-25 | 25 | 8×3.3 | |||||||||||||||
| MZ30 | 30 | 10×3.3 | |||||||||||||||
| MZ35 | 1080 | 0.49 | 1700 | 300 | 150 | 35 | 10×3.3 | 87 | 85 | 110 | 50 | 80 | 8.7 | 95 | 16 | 6-M8×1.25 | 4.8 |
| MZ45-40 | 1620 | 0.69 | 1700 | 300 | 150 | 40 | 12×3.3 | 92 | 90 | 125 | 60 | 95 | 8.4 | 110 | 16 | 8-M8×1.25 | 6.2 |
| MZ45 | 45 | 14×3.3 | |||||||||||||||
| MZ60-50 | 2110 | 0.98 | 1600 | 250 | 150 | 50 | 14×3.8 | 102 | 100 | 155 | 80 | 125 | 9.1 | 140 | 16 | 8-M8×1.25 | 10.2 |
| MZ60-55 | 55 | 16×4.3 | |||||||||||||||
| MZ60 | 60 | 18×4.4 | |||||||||||||||
| MZ70-65 | 3040 | 1.27 | 1300 | 250 | 150 | 65 | 18×4.4 | 105 | 103 | 175 | 95 | 145 | 8.6 | 162 | 16 | 8-M8×1.25 | 13.2 |
| MZ70 | 70 | 20×4.9 | |||||||||||||||
