Active Member
|
[China]
Address: No.9 Xiangdun Road,Huaxi Village,Jiangyin City,China
Contact name:Joyce Wang
Jiangyin Bosj Science & Technology Co., Ltd. |
|
|
Steel Silo Roll Forming Machine Production Craft
2 Steel Silo Machine Working Condition
2.1
2.1.1 Operation area:20X 5.0 X 8(length X width X height)m
2.1.2 The direction of feeding: from left to right
2.1.3 Power: 380V, 50Hz, 3 parch
2.1.4 Total Power:about 265kw
2.2 Main technical data
2.2.1 Width of material sheet:1145 mm
2.2.2 Thickness of material sheet:3~7mm
2.2.3 Low carbon steel,galvanized sheet,cold steel,etc
2.2.4 Working piece length:≤6000 mm
2.3 Main Machine Technical Parameters
10T hydraulic decoiler | |
Steel coil width | from 1250 mm to 1500 mm |
Internal diameter of coil | variable, from 470 mm to 620 mm |
Coil placement in the coil holder | hydraulic hoist |
Maximum coil weight | 10000 Kg |
Working speed | 0-15m/min adjustable |
Maximal out diameter | 1600mm |
Main motor power | 7.5KW AC motor |
Hydraulic power | 5.5kw |
Forming Section | |
Material of the profile | 195-235Mpa GI or carbon steel |
Thickness range | 3.0-4.0mm |
Main motor power | 60kw, AC motor, motor inside of main machine |
Roll station | 20stations (according the final design) |
Shaft diameter | ￠150mm |
Machine roll forming speed | not less than 18 meters per minute |
Transmission | by gear box 200*500 |
Auto stacker and transmission table | |
Take the sheet by air compressor, 5.5KW( provide by customer) | |
Air cylinder swing arm size | 40mmx80mm |
Transmission power | 4kw AC motor |
Stacker length in 12m, transmission table length in 25m | |
Drive of transmission | by 1.0inch double line chain |
Transmission roller | ASTM1045 with chrome, diameter of roller is in 80mm |
Carrying capacity | maximal 5000Kg |
Length of capacity | 500-12000mm |
The maximal stacker height | 300mm |
3 Station Curving Machine | |
Thickness | 3-4mm |
Maximal feeding width | 1000mm |
Roll speed | 0—10m/min |
Main power | 30KW |
Roll station | 3 stations |
Shaft material | 45# forge steel, polished and coated with chrome |
Diameter of shaft | 180mm |
Material of roller | Gcr15 steel, polished and with HRC58-62° |
Adjust angle motor power | 3KW |
Dimension of machine | 2000 mm×1200 mm×1300 mm |
Drive | by gear box |
Curving mode | horizontal |
Curving diameter | ≥800mm |
