Beyde Trading Co.,Ltd |
Verified Suppliers
|
|
GLK500/6+12 Planetary Cabler Stranding And Armouring With Backtwist For Pay-Off Reels Dia. 250 Mm To 800 Mm
1.Application:
Planetary strander is an important equipment for wire and cable
stranding. It is mainly used for copper stranded wire, aluminum
stranded wire, steel stranded wire, steel core aluminum stranded
wire, and cabling of insulated wire core and OPGW stranding, etc.
Generally, the traditional planetary strander adopts the ground
shaft transmission type, and the transmission of capstan and the
stranding cage are usually driven by the same motor through the
reduction box, gearbox, ground shaft, angle box, etc. The
traversing line is controlled individually or adopts centralized
transmission and controlled by the above motors.
This structure has many disadvantages:
(1) The ground shaft transmission is an open transmission with poor
lubrication conditions and foreign objects such as dust are easy to
enter will cause gear wear and damage and loud noise at the work
site.
(2) Adopting gear shifting, the gearbox structure is complex, and
the gap between the shifting gears is large, which is prone to
motion shock and damage the ground shaft, gears, box, etc. At the
same time, because of its complicated mechanical structure, it
makes the maintenance and repair of the whole machine more
difficult.
(3) Restricted by the ground shaft, the speed of the twisting cage
is low, and the production speed is difficult to increase, which
restricts the production efficiency of the twisted wire production.
(4) Due to the fixed speed ratio of the gearbox, its pitch can only
be changed within a limited range, and it is impossible to achieve
the pitch required for certain process designs.
The cradle stranding machine developed by our company integrates
the stranding production process of domestic first-class cable
manufacturers, adopts the sub-motor transmission mode, and each
winch and traction are driven by separate motors.
1. Each parts of this equipment is driven by independent motor with
low noise and without cage.
2. Human-machine interface, you can set, display and adjust the
parameters on touch screen. Easy operation improves the production
efficiency.
3. The stranding pitch can realize the stpeless adjustment and
large pitch range is easy to improve the production technology.
4. Adopting planetary gear structure, can realize 100%
back-twisting.
2. Specification:
Type | JLY-400 | JLY-500 | JLY-630 |
Single wire die (mm) | Copper: Φ1.2-Φ3.5 | Φ1.2-Φ3.5 | |
Aluminum: Φ1.5-Φ3.5 | Φ1.5-Φ3.5 | ||
Insulation wire core: Φ5 | Insulation wire core: Φ7 | ||
Stranding die (MAX) (mm) | Φ35 | Φ45 | |
Stranding pitch (mm) | 34.7-866 | 42-1000 | 57-1280 |
Taping pitch (mm) | 11-181 | 11-188 | |
Capstan line speed (m/min) | 4.1-31 | 4.2-32 | |
Bobbin in the cage | PN400 | PND500 | PND630 |
Central pay off bobbin | PN800-PN1600 | ||
Take-up bobbin | PN1000-PN2000 | PN1250-PN2500 | |
Main motor (KW) | 45 (AC) | 55 (AC) | 75 (AC) |