Full Automatic Wire Extruder Machine Silicone Rubber Cable Sj-65/12

Full Automatic Wire Extruder Machine Silicone Rubber Cable SJ-65/12

Applications

Mainly used for high temperature resistant electrical wire & cable by silicone rubber coating & vulcanizing.

Silicone rubber is an elastomer (rubber-like material) composed of silicone, which can be found in a wide variety of products including medical devices and implants, electronics, automotive applications, voltage line insulators, and in home repair and hardware.

Silicone rubber is generally non-reactive, stable, and resistant to extreme environments and temperatures while still maintaining its useful properties. Below are the key characteristics of Silicone Rubber:

– High voltage resistant
– Extreme temperature resistant from -40 ~ 150°C
– Acid & alkaline resistant
– Bio-compatibility which is critical for medical applications
– Available for Auto Clave sterilization (up to 134°C) process for medical applications
– Better flexibility and tensile strength
CTi use Silicone Rubber as insulation or jacket material in following product categories:
1. Medical related cable products to meet bio-compatibility & sterilization requirements.
2. Consumer products such as USB-C and HDMI for premium touch & feel.
3. Power or heat related cable products which required extreme temperature or high voltage resistant.

1. Spare Parts Brands:

Motor: Dongguan Motor , Teco, ABB, Siemens
Inverter : Japan Yaskawa, Siemens, Taiwan Teco
Temperature Control Meter: Japan RKC;
Auxiliary Relay: Japan Omron ;
Ammeter and Voltmeter: Taiwan Risesun ;
Indicator, Switch and Button: Taiwan TEND ;
Contactor: Taiwan Shihlin
Line Speed Meter: Taiwan FOTEK/Yangming
Bearing : NSK, SKF

2. Technique Specifications:

- Process material: PVC/XLPE
- Process solution: single layer/ color stripping
- Conductor section: 0.75mm2to 10mm2 (single core)
Or up to 4 X 6 mm2multi core cable
- Insulation thickness: 0.5mm---1.5mm
- Size after insulation: 1.5mm---15mm
- Linear speed: Max. 450m/min (based on the cable diameter)
- Line axis height: 1000mm
- Machine color: Based on customer's requirement
- Machine direction: Based on customer's requirement
- Power: 3P/ 380V / 50Hz
- Total line length: about 30 m

3. Consisting Components:

1,double-shaft pay-off rack
2,straightener platform
3,main extruder
4,automatic dryer and hopper
5,electric apparatus main control cabinet
6,Double layer movable trough
7,laser diameter gauge or Digital Diameter controller
8,high speed printing machine
9,double-wheels capstan
10,Meter counter
11,horizontal type wire-accumulator
12,power frequency sparker

4. Optional:

1. Different take-up machine etc.
2. Flyer pay-off or other pay off machine.
3. Taiwan or Swiss brand crosshead.
4. Copper pre-heater.
5. Talc applicator.
6. Different brand Laser diameter gauge.
7. Coiler on line