Active Member
|
[China]
Address: Yongfu Road, Yetang Town District , Shanghu Town, Changshu, Suzhou, Jiangsu, China (Mainland)
Contact name:Wendy
Changshu Xinya Machinery Manufacturing Co., Ltd. |
|
|
Optical cable traction engine for pulling optical cable ,fiberglass cable, fiberglass duct rod, duct rodder, replace workerman for pulling, the force is 200kg, so reduce the member.
1.The machine is mainly composed of engine, gearbox and
transmission device. The clamping of the transmission device is
used up and down to make the cable effective. Tractors with
gasoline engine as power source, the transmission drive shaft gear
chain, the chain bite transmission device, drive transmission belt,
realize the straight line, the machine is also equipped with
support bar to support machine in the operation of the cable force,
keep the machine fixed transmission cables.
2. The machine is easy to operate, and the four operating stops are
(push, pull, idle, and slow) to select the desired position. Before
changing gear, you must adjust the throttle to the idle state, and
then control the accelerator on your hand when you hang it. Turn
off the flame switch after use.
Product Description
Cable Hauling Machine is an electric machine for laying power cable (or communication cable).It can be used with cable tractor, hoist and other cable laying machine, which can save man power and material greatly and reduce construction cost effectively.
Product Display
Specification
Quick Detail of Cable Hauling Machine:
Traction | ＞300KG |
Pulling Speed | 1m -1.6 m/s |
Outlet opening size | 5mm*45mm |
Belt Size | 1000m*60mm |
Engine Gasoline Tank | 4L,(92#,93#Gasoline) |
Total Power | 4.3KW |
Machine Size | 80*60*80cm |
Machine Weight | 90KG |
Line Bracket Dimension | Out diamerer:110cm Inner Diameter:85cm |
Suitable Diameter Of Cable | Cable wire rope,Cable steel |
Part of Cable Hauling Machine details:
Application
Cable Hauling Machine widely used,can replace the artificial pull, the speed is quick, does not injure the cable.
