Active Member
|
[China]
Address: Yongfu Road, Yetang Town District , Shanghu Town, Changshu, Suzhou, Jiangsu, China (Mainland)
Contact name:Wendy
Changshu Xinya Machinery Manufacturing Co., Ltd. |
|
|
Product Introduction
We are a battery powered tool, designed with hydraulic system,
powerful motor, high-performance battery, scissors type cutting
blades, pistol type tool body, intended to be used to cut Armoured
Cu / Al Cables.
Hydraulic electric cable cutter features
1. Ergonomic design, light weight, reasonable forward & back
operation button arrangement;
2.It can be operated with one hand;
3. High pressure piston pump driven bipolar design, fast cutting;
4. Vacuum heat treatment process of alloy steel blade, long life;
5. The head can rotate 360 degrees, for different angles cutting
jobs.
Features
360° flip-top latch rotary crimping head,working at any site
Pistol type tool body design for better balance and easy handling
Double piston pump and powerful motor ensure quick crimp
Automatically fully retract ram and stop motor when complete
cutting
Manually retract ram area & lower battery charges or
lacking pressure,and acoustic signal sounds and LED flash
Li-ion battery with high capacity and fast charging
A temperature sensor makes the tool stop working automatically when
the temperature over 60°C under continuous long time working
Product Parameter
Cutting force: | 65KN |
Cutting range: | Φ45mm |
Stroke: | 60mm |
Cutting/charge: | 220 times |
Cutting cycle: | 2s-5s |
Battery voltage: | 18v |
Battery capacity: | 3.0Ah |
Charging time: | Approx 2 hours |
Weight(incl. battery): | Approx. 5.9kg |
Gross weight: | Approx13kg |
Package: | One pc/Aluminum alloy case/Cardboard box |
Accessories: | |
Battery: | 2pcs |
Charger: | 1pcs |
Sealing ring of cylinder: | 1set |
Sealing ring of safety valve: | 1set |
Within Warranty we obey the following simple terms
1.Any defective but not so bad and can be fixed by your side, we
make some compensation.
2.If volume batteries are very bad/mistake models, sending them
back and we re-send the good/right batch. Or refund all back to
you.
3.Partial products in bad condition,collect them and send them
back.We send you replacements ASAP
If it's our problem,we pay for all freight cost.
