Al Cu Terminal Split 30mm Hydraulic Pliers

EP-510H CRIMPING CAPACITY 50-400MM2 AL,CU TERMINAL SPLIT HYDRAULIC PLIERS PRODUCT USE AND CHARACTERIST
 

Features:

1)The compression pliers are designed for hydraulic crimping on power cable and wire. The crimped conductor is tested in high conductivity and close contact so that it's uneasy to break out and turn hot .
2)Open cut design for convenient operation.
3)The head could be rotated 180° freely for narrow space working.
4) Standard die assembling 50, 70, 95, 120, 150,185,240,300,400mm2
5) The oil pipe coupler fitted with PT 3/8'' thread
6) To be worked with pedal pump, manual pump and electric driven hydraulic pump.

Data Sheet

1.CRIMPER HEAD WITH C-SHAPE OPEN TYPE

The maximum stroke is 38mm, which is convenient to put and take when you press the copper and aluminum terminal.

2.THICKENING MOLD DESIGN

The size is thicker than others, so it is tight and not easy to fall off.

3.IT CAN BE USED WITH HYDRAULIC PUMPS

Split hydraulic crimper should work with manual hydraulic pump or electric hydraulic pump.

4.MALE CONNECTOR+ PLASTIC DIRT-PROOF BOOT

The female connector on the hydraulic pump is connected with the male connector on the crimper (thread specification: ZG3/8). When not in use, the plastic boot can be screwed onto the male connector to prevent dust.

5.PORTABLE PLASTIC BOX PACKAGING

The internal molds are arranged neatly.