|
[China]
Trade Verify
Address: F5,Building8, changshunchuanggu, jinfeng,Zhangjiagang 215625,China
Contact name:Jerry Sun
Zhangjiagang RY Electronic CO.,LTD |
|
Verified Suppliers
|
|
|
High Gain GSM 2.4G 3G 4G Helical Coil Antenna 7.5dBi Screw Base
Mount With 1 Meter Cable
Electrical Characteristic:
Item | Specifications | |
| Antenna | Frequency Range | 824~960/1710~2170MHz/2700MHz |
Polarization | Linear | |
Gain | 7.5dBi | |
V.S.W.R | <2.0 | |
Impendance | 50 ohm | |
| Mechanical | Cable | RG174 |
Connector | SMA/FAKRA or others | |
Radome Material | ABS | |
Mounting Method | Screw | |
| Environmental | Operating Temperature | -40°C to +85 ° |
Relative Humidity | Up to 95% | |
Vibration | 10 to 55Hz with 1.5mm amplitude 2hours | |
Environmentally Friendly | ROHS Compliant | |
Product Details:
Our Company:
1. RY Electronics has over 10 years of experience designing and
manufacturing custom cable assemblies and antennas in large or
small volumes depending on your needs.
2. Our manufacturing facilities can build just about many types of
custom cable assembly(LVDS cable/Flat cable/RF cable/wire harness)
as well as GPS/WIFI/ISM/GSM/3G/4G antenna and RF connectors.
☀ We are RY Communication, we can provide different type wifi
antennas of different gain.
☀Our wifi antennas are mainly use in Wireless Router to Enlarge the
wireless network signal.
☀ Our wifi antennas can be made in different gains and frequency,
if you need, we can accept customized.
☀ Our wifi antennas can be made with different connectors such as
sma connectors, tnc connectors and n connectors.
☀ We can also produce GSM antennas, indoor or out door panel
antennas, sucker antenna and so on.
☀ If you need, we can also customized cable assembly used in antnna
like sma to IPEX/UFL cable assemblies. For this product, please
contact our sales deparment and get more details.
☀ If you require a special RF cable assembly configuration not
found here, you can create your own RF cable assembly configuration
by calling our sales department.
magnetic mount antenna
Application:
1. The antenna radiates and receives radio waves. However, it is
not radio waves that the transmitter sends to the antenna through
the feeder. The receiving antenna can not send radio waves directly
through the feeder to the receiver, which must go through the
energy conversion process. Next, we take the radio communication
equipment as an example to analyze the signal transmission process,
and then explain the energy conversion function of the antenna.
2. At the transmitter end, the modulated high frequency oscillating
current (energy) generated by the transmitter is fed into the
transmitting antenna by the feeding device (the feeding device can
transmit current wave or electromagnetic wave directly depending on
the frequency and form). The transmitting antenna converts the high
frequency current or guided wave (energy) into radio wave-free
electromagnetic wave (energy) to the circumference. Circumferential
radiation (see Figure 1); at the receiving end, radio waves
(energy) are converted into high-frequency current or guided waves
(energy) through the receiving antenna and transmitted to the
receiver via the feeding device. From the above process, it can be
seen that the antenna is not only a device for radiating and
receiving radio waves, but also an energy converter and an
interface device between circuit and space.
FAQ:
1. When can I ?
We usually quote within 24 hours after we get your inquiry. If you
are very urgent to get the price, please call us or tell us in your
email so that we will regard your inquiry priority.
