TOBO STEEL GROUP CHINA |
Verified Suppliers
|
|
2 1/2" 150LB WN Flange SS ASME B 16.5 RJ Flange Pipe Fittings With Polished Surface ASTM A694 F52
Carbon Steel A694 F52 Material Equivalent, A694 Gr F52 Elbow Specification.
ASTM A694 F52 Flanges and fittings are designed to be used in high pressure transmission service. Therefore, these flanges are well suited for use in oil and gas transmission service or for use in the petroleum industry. Because of its high strength, in combination with superior toughness and low cost, the CS ASTM A694 Gr F52 Flanges are very popular in many industries. Manufactured in several grades, the flanges minimum yield strength at 2% offset in KSI is often indicated as its grade. Hence in the instance of Carbon Steel A694 F52 Material, the minimum yield strength at 2% offset is valued at 52 KSI. Elbow fittings are one of the more popular fittings that could be used to divert the direction of flow.
ASTM A694 Grade F52 Blind Flanges Chemical Composition, ASTM A694 Gr F52 Forged Fittings Mechanical Properties, CS ASTM A694 Gr F52 Flanges Physical Properties.
What Is ASTM A694 F52 Flanges?
Typically the SA694 Gr F52 Elbow could be produced at an angle of either 45 degrees, 90 degrees or 22.5 degrees unless they are to be customized by the buyer. Many times, ASTM A694 Gr F52 Forged Fittings demonstrate an increase in its mechanical properties on account of the grain flow being refined and directed. ASTM A694 Grade F52 Blind Flanges are a type of component that is produced without a bore in the centre, and therefore, can be used to seal off or shut off valves or equipment or pipes in a piping system.
Manufacturing process
The steel material under A694 shall adopt one of the following smelting processes: open furnace, electric furnace or oxygen top-blown converter. Moreover, steel should be completely deoxidized.
As agreed by the buyer and manufacturer, the material shall be carbon steel, high strength low alloy steel or alloy steel. Further more, manufacturer shall report the chemical composition of the used material. All the produced products shall be adapted to welded on the pipes of ASTM A53, ASTM A106, ASTM A381, API 5L or the fittings of MSS SP-75.
Forging materials include ingots or billets, billets, slabs or forged, rolled rods, and cut to the specified length according to the appropriate process.
Hot working shall be sufficient to develop a wrought structure throughout the part.
Flanges shall not be machined directly from plate nor from solid bar stock.
ASME SA 694 F52 Mechanical Properties
Element | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
SA 694 F52 | 415 | 315 | 20 % |
High Yield A694 Grade F52 Physical Properties
ASTM A694 Grade | Yield Strength min. | Tensile Strength min. | Elongation min. | ||
MPa | ksi | MPa | ksi | % | |
A694 Grade F52 | 360 | 52 | 455 | 66 | 20 |
ASTM A694 Grade F52 Chemical Requirements
Carbon [C] | ≤0.30 |
Manganese [Mn] | ≤1.60 |
Phosphorus [P] | ≤0.025 |
Sulfur [S] | ≤0.025 |
Silicon [Si] | 0.15-0.35 |
SA694 CS Gr F52 Temperature Range
Temp. °C | Pressure Range | ||||||
---|---|---|---|---|---|---|---|
| 150 | 300 | 400 | 600 | 900 | 1500 | 2500 |
-29 ~ 38 | 19.6 | 51.1 | 68.1 | 102.1 | 153.2 | 255.3 | 425.5 |
50 | 19.2 | 50.1 | 66.8 | 100.2 | 150.4 | 250.6 | 417.7 |
100 | 17.7 | 46.6 | 62.1 | 93.2 | 139.8 | 233.0 | 388.3 |
150 | 15.8 | 45.1 | 60.1 | 90.2 | 135.2 | 225.4 | 375.6 |
200 | 13.8 | 43.8 | 58.4 | 87.6 | 131.4 | 219.0 | 365.0 |
250 | 12.1 | 41.9 | 55.9 | 83.9 | 125.8 | 209.7 | 349.5 |
300 | 10.2 | 39.8 | 53.1 | 79.6 | 119.5 | 199.1 | 331.8 |
325 | 9.3 | 38.7 | 51.6 | 77.4 | 116.1 | 193.6 | 322.6 |
350 | 8.4 | 37.6 | 50.1 | 75.1 | 112.7 | 187.8 | 313.0 |
375 | 7.4 | 36.4 | 48.5 | 72.7 | 109.1 | 181.8 | 303.1 |
400 | 6.5 | 34.7 | 46.3 | 69.4 | 104.2 | 173.6 | 289.3 |
425 | 5.5 | 28.8 | 38.4 | 57.5 | 86.3 | 143.8 | 239.7 |
450 | 4.6 | 23.0 | 30.7 | 46.0 | 69.0 | 115.0 | 191.7 |
475 | 3.7 | 17.4 | 23.2 | 34.9 | 52.3 | 87.2 | 145.3 |
500 | 2.8 | 11.8 | 15.7 | 23.5 | 35.3 | 58.8 | 97.9 |
538 | 1.4 | 5.9 | 7.9 | 11.8 | 17.7 | 29.5 | 49.2 |
Get instant delivery of ASTM A694 F52 Flanges In India, Since 1997, We Have Been Supplyed A694 F52 High Pressure Forged Fittings In Mumbai, Contact us today For Buy ASTM A694 F52 Carbon Steel Socket Weld Full Coupling With Best Price.
SA694 Gr F52 Elbow Specification
Specification : | ASTM A694 F52 Flanges |
Design For Size: | ASME, DIN, JIS, ANSI, BS, PN, EN, ASA |
Flange Machining Equipment: | Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, Press machine etc |
Pressure Rating Table: | Class 150 LBS, Class 300 LBS, Class 600 LBS, Class 900 LBS, Class 1500 LBS, Class 2500 LBS |
Standards: | UNI Flanges, AWWA Flanges, MSS SP44 Flanges, ASME B16.5 Flanges, ASME B16.47 (Series A, Series B) GOST Flanges, ASME B16.38 Flanges, EN-1092 Flanges, BS10 Flanges, DIN Flanges, PN Flanges, JIS Flanges, ISO Flanges |
Production Process: | Machined, Forged, Heat Treated |
Application: | Fabrication Industry Natural Gas Industry Chemical Industry Oil And Gas Industry Water Pipeline Industry Nuclear Power Plant |
Size Chart : | 1/2″ (15 NB) To 48″ (1200NB) |
Coating Flange Faces : | Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized, Oil Black Paint, Anti-rust Paint |
Dimensions Class: | 2000#, 3000#, 6000#, 9000# |
Forged Type : | NPT (Threaded), BSPT, BSPP. |
A694 F52 Forged Socket Weld Tee Material Properties, Heat Treatment Of SA 694 F52 Screwed Fittings, ASTM A694 Gr F52 SORF Flange
Application Industries
Packaging
We Sumit Impex Metal Ensure the best quality of Packing , because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
Country we serve / City we deliver
Related Products
FAQ