ANSI B16.5 Carbon Steel 1 inch Class 150Rf Flat Welding Flange
Product name | Flat Flange | | | | |
Usage | Used for the connection of all kinds of pipelineto convey the
water, steam, air, gas and oil | | | | |
Package | Wooden cases/pallets | | | | |
Delivery | Within 30 days | | | | |
| ANSI | ANSI B16.5 ASME B16.47 series A/B | | | | |
DIN | DIN | | | | |
GOST | GOST 12820-80 12820-81 | | | | |
EN | EN1092-1:2002 | | | | |
JIS | JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS
B8210 | | | | |
BS | BS4504 BS10 Table D/E | | | | |
| ANSI | F 304/L, F316/L F317L,F347H,F321,F904L,F310S ,F51/60
F53,F44,A105,A105N Alloy Steel: WHPY45/52/65/80 Alloy Steel:
WHPY45/52/65/80 |
DIN | CS RST37.2;S235JR SS 304/304L,316/316L |
GOST | CS CT20;16MN;SS 304/304L,316/316L |
EN | CS RST37.2;S235JR;C22.8SS 304/304L,316/316L |
JIS | SS400,SF440 SS 304/304L, 316/316L |
BS | CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316 |
| ANSI | Class 150, 300, 600, 900, 1500 2500lbs |
DIN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 |
GOST | PN6,PN10,PN16,PN25 |
EN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 |
JIS | 1K,2K,5K,10K,16K,20K,30K,40K |
BS | PN6,PN10,PN16,PN25,PN40,PN64,PN100 |
| ANSI | 1/2″ – 60″ |
DIN | DN15-DN2000 |
GOST | DN15-DN1600 |
EN | DN15-DN2000 |
JIS | 15A-1500A |
BS | DN15-DN2000 |
Pipe flanges are manufactured in all the different materials like
stainless steel, cast iron, aluminium, brass, bronze, plastic etc.
but the most used material is forged carbon steel and have machined
surfaces.
In addition, flanges, like fittings and pipes, for specific
purposes sometimes internally equipped with layers of materials of
a completely different quality as the flanges themselves, which are
"lined flanges".
The material of a flange, is basically set during the choice of the
pipe, in most cases, a flange is of the same material as the pipe.
All flanges, discussed on this website fall under the ASME en ASTM
standards, unless otherwise indicated. ASME B16.5 describes
dimensions, dimensional tolerances etc. and ASTM the different
material qualities.
The most used flange types are:
Common types of pipeline flange faces
Flanges provide the necessary connections to link pipelines. Faces
are the mating surface of a flange.Different types of flange faces
are used as the contact surfaces to seat the sealing gasket
material. ASME B16.5 and B16.47 define various types of flange
facings, including the raised face, the large male and female
facings which have identical dimensions to provide a relatively
large contact area.Flange faces have to be smooth enough to ensure
a tight, leak-free seal for bolted flanges.
Bolted Flange connections
A bolted flange connection is a complex combination of many factors
(Flange, Bolts, Gaskets, Process, Temperature, Pressure, Medium).
All these various elements are interrelated and depend upon one
another to achieve a successful result.
The reliability of the flanged joint depends critically upon
competent control of the joint making process.
Some other Disadvantages of flange connections..
- Each flange connection can leak (some people claim that a flange
connection is never 100 percent leak proof).
- Flanged pipe systems need much more space (just think of a pipe
rack).
- Insulation of flanged pipe systems is more expensive (special
flange caps).
Of course, flange connections have great benefits; some examples..
- A new line can contain multiple pipe spools and can be manufactured
in a workshop.
- This pipe spools can be assembled in the plant without the need to
be welded.
- NDO (X-ray, Hydro test etc.) in the plant is not necessary, because
this has been done in the workshop.
- Blasting and painting in the plant is not necessary, because even
this has been done in a workshop
(only paint damages during installation should be repaired). - FAQ
Q1. Are you trade company or factory?
A: We are trading company in shanghai, but we have five branch
factories which can supply the best quality pipes, tubes, fittings
flanges and related accessories. Welcome to visit us.
Q2: Do you provide free samples? If not, how do you charge for it?
A: Yes, we could offer the sample for free charge but do not pay the
cost of freight.
Q3. What can you buy from us?
A. The main forgings are the design forging processing of
mechanical parts for automobiles, railroad forgings, agricultural
machinery forgings,hole forging of valve body, connecting nut of
oil pipeline, rigging ect.
Q4. Why is forged metal stronger than cast or machined metal?
This stems from the grain flow caused through forging. As the metal
is pounded the grains deform to follow the shape of the part, thus
the grains are unbroken throughout the part. Some modern parts take
advantage of his for a high strength-to-weight ratio
Q5. How long is your delivery time?
A. Lead time is about 10-25 days. Orders with numerous kinds of parts
will take more days.
Customers at home and abroad are welcome to write and talk about
business.