ASTM A234 Scope
1.1 This specification covers wrought carbon steel and alloy steel
fittings of seamless and welded construction covered by the latest
revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, and
MSS-SP-95. These fittings are for use in pressure piping and in
pressure vessel fabrication for service at moderate and elevated
temperatures. Fittings differing from these ASME and MSS Standards
shall be furnished in accordance with Supplementary Requirement S58
of Specification A 960/A 960M.
1.2 Optional supplementary requirements are provided for fittings
where a greater degree of examination is desired. When desired, one
or more of these supplementary requirements may be specified in the
order.
1.3 This specification does not cover cast welding fittings or
fittings machined from castings. Cast steel welding fittings are
governed by Specifications A 216/A 216M and A 217/A 217M.
1.4 This specification is expressed in both inch-pound units and in
SI units. However, unless the order specifies the applicable “M”
specification designation (SI units), the material shall be
furnished to inch-pound units.
1.5 The values stated in either inch-pound units or SI units are to
be regarded separately as standard. Within the text, the SI units
are shown in brackets. The values stated in each system are not
exact equivalents; therefore, each system must be used
independently of the other. Combining values from the two systems
may result in nonconformance with the specification.
GENERAL NOTE: All values are maximum unless otherwise indicated.
Mechanical properties of ASTM A234
Tensile Requirements | WPB | WPC, WP11CL2 | WP11CL1 | WP11CL3 |
Tensile Strength, min, ksi[MPa] | 60-85 | 70-95 | 60-85 | 75-100 |
(0.2% offset or 0.5% extension-under-load) | [415-585] | [485-655] | [415-585] | [520-690] |
Yield Strength, min, ksi[MPa] | 32 | 40 | 30 | 45 |
[240] | [275] | [205] | [310] |
Where the wall thickness lies between two values above, the min
elongation value is determined by the following equations:
- Longitudinal E=48t+15.00
- Transverse E=32t+10.00
- E = elongation in 2in [50mm], %
- t = actual thickness of specimen, in [mm]
FAQ
1.How can I get the price? |
-We usually quote within 24 hours after we get your inquiry(Except
weekend and holidays). -If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote. |
2. Can I buy samples placing orders? |
-Yes.Please feel free to contact us. |
3.What is your lead time? |
-It depends on the order quantity and the season you place the
order. -Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity. |
4.What is your payment term? |
-T/T,Western Union,MoneyGram,and Paypal.This is negotiable. |
5.What is the shipping method? |
-It could be shipped by sea,by air or by
express(EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders. |
6.How do you make our business long-term and good relationship? |
-1. We keep good quality and competitive price to ensure our
customers benefit ; -2. We respect every customer as our friend and we sincerely do
business and make friends with them,no matter where they come from. |