Home Companies TOBO STEEL GROUP CHINA

Inconel 602 N06025 2.4633 Nicrofer 6025HT VDM Nickel Alloy Pipe

Contact Us

[China]

Trade Verify

Address: 2F,Building7,Baolong Center,No.689,Xiwang Road,Jiading District,Shanghai,201800,China

Contact name:Joy Wang

TOBO STEEL GROUP CHINA

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Inconel 602 N06025 2.4633 Nicrofer 6025HT VDM Nickel Alloy Pipe

Country/Region	china
City & Province	shanghai shanghai
Categories	Nickel

Product Details

Inconel 602 N06025 2.4633 Nicrofer 6025HT VDM Nickel Alloy Pipe

Overview

Quick Details

Place of Origin:: China

Type:: Nickel Pipe

Grade:: 602 N06025 2.4633 Nicrofer 6025HT(VDM)

Ni (Min):: Bal.

Powder Or Not:: Not Powder

Ultimate Strength (≥ MPa):: 680Mpa min.

Elongation (≥ %):: 30% min

Standard:: ASTM B163

Delivery Condition:: Annealed

Length:: 2m-12m or as customers' requests

Inspection:: The third party is acceptable

Trade term:: CIF CFR FOB

Manufacture:: YES

Certificate:: EN 10204 3.1

Outer Diameter:: 6-219mm

Wall Thickness:: 1.0-12.7mm

Supply Ability

Supply Ability: 500 Ton/Tons per Month Inconel 602 N06025 2.4633 Nicrofer 6025HT VDM Nickel Alloy Pipe

Packaging & Delivery

Packaging Details: Inconel 602 N06025 2.4633 Nicrofer 6025HT VDM Nickel Alloy Pipe
Seaworthy Wooden and pallet packing.
Other packing as per customer requirement.

Port: Shanghai

Best Quality 602 N06025 2.4633 Nicrofer 6025HT(VDM) Nickel Alloy Tube Manufacturer in China

Standard: ASTM B163-04 Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

Steel Grade: 602 N06025 2.4633 Nicrofer 6025HT(VDM)

Size Range:

OD: 6-219mm, Wall Thickness: 1.0-15mm

Chemcial Composition(%):
Unless specified in the table, numerical value presents maximum.

Grade

(UNS)

N06025

0.15-0.25

0.50

0.01

24.0-26.0

Bal.

8.0-11.0

Mechanical Properties:

Finish Condition

Tensile Strength

(KsiMpa) Min

Yield Strength

(Ksi/Mpa) Min

Elongation

(%) Min

Annealed

98Ksi/680Mpa

39Ksi/270Mpa

30%

Applications:

· Feed water and steam generator tubing.
· Brine heaters, sea water scrubbers in tanker inert gas systems.
· Sulfuric acid and hydrofluoric acid alkylation plants.
· Pickling bat heating coils.
· Heat exchangers in a variety of industries.
· Transfer piping from oil refinery crude columns.
· Plant for the refining of uranium and isotope separation in the production of nuclear fuel.
· Pumps and valves used in the manufacture of perchlorethylene, chlorinated plastics.
· Monoethanolamine (MEA) reboiling tube.
· Cladding for the upper areas of oil refinery crude columns.
· Propeller and pump shafts.

Packing:

FAQ

Q: Does this tubing come with triclamp ends to be coupled together?A: This particular tubing comes without tri-clamp ends standard. We
can always weld tri-clamp ferrules to the end of tubes for any
specific length you need. These products are referred to as
tri-clamp spool assemblies. If you need a specific length, please
contact us.
 
Q: Are you able to cut tubing to lengths that don't require freight
shipping? Say 5' lengths for example.?
A:Yes, we are able to cut down to other sizes. UPS Ground is able to
ship up to 7' without the tubing being considered "oversized".We do
charge a cutting fee for this service, however. Please contact us
for a quote.
 
Q:How much does 1 stick of 4" tube weigh?
A: One 20' Stick of 4" Sanitary Tubing weighs approximately 75 pounds.
 
Q:You list gauge of this tubing at 16, but the wall thickness at
0.065". Isn't 16 gauge 0.0625"?
A: The wall thickness and gauges are all displayed in the table below.
Please contact us if you have any other questions.
 
Q: Do you sell tubing in anything less than cases? I need to order
just over 400 feet but don't want to pay for two cases as this is
More than I need.
A: We do sell tubing on an individual basis however there is a $50
"broken box" fee applied to any order less than an entire
case.Since we don't offer a way to order individual tube pieces
online please call us to place an order over the phone.
 
Q: Do this product ship via freight?
A: Yes, our tubing comes in standard 20 foot lengths and will need
to ship via freight. I'd also like to mention that there is a
broken box charge meaning that if you do not order an entire box of
tubing you will be charge additional fees as such. For more
information please contact us. Thanks.