|
[China]
Trade Verify
Address: Room 336, Building A, Yingfeng NO1192, Zhongshan Avenue Middle, Tianhe District
Contact name:Paul liu
Guangzhou Bulldog Mechanical Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Volvo 14513716 VOE14513716 Dipper Arm Seal Kit EC160B EC180B EW160B Cylinder Service Kit
| Product Name | VOLVO Dipper Bucket Cylinder Service Kit VOE14513716/ VOE 14513716/ 14513716 |
| Model Number | VOLVO EC160B, EC180B, EW160B |
| Material | PTFE, HNBR, ACM, PU, Rubber, NBR, VMQ, |
| Feature | Corrosion resistance, abrasion resistant, low cost, etc. |
| Packing | PP bag inside, carton box outside |
| Payment Terms | Western Union, L/C, T/T, Money Gram, D/A, D/P |
| MOQ | Trial order acceptable |
| Shipping Mode | By air, by sea, by express (FedEx, UPS, DHL, TNT, etc.) |
| Part No. | 14513716 |
| Brand name | BULLDOG |
| CertifiCATEEion | ISO9001 |
| Market | Eastern Europe, Middle East, North America, etc. |
| Condition | 100% new, unopened |
| Pos. | Part No. | QTY | Parts Name |
| VOE14510790 | [1] | Dipper Arm Cylinder | |
| VOE14563858 | [1] | Dipper arm cylinder | |
| VOE14514559 | Dipper Arm Cylinder | ||
| VOE14563880 | Dipper Arm Cylinder | ||
| 1 | SA9216-07010 | [1] | Lock washer |
| VOE14530666 | [1] | Washer | |
| SA9216-07010 | Lock washer | ||
| 2 | SA1146-02880 | [1] | Pin |
| 3 | SA1146-06890 | [1] | Lock nut |
| VOE14524049 | [1] | Lock nut | |
| VOE14534347 | [1] | Lock nut | |
| VOE14524049 | Lock nut | ||
| 4 | SA1146-06870 | [1] | Pad |
| SA1146-06870 | Pad | ||
| 5 | SA1146-08010 | [1] | Seal |
| 6 | [1] | Head | |
| 7 | [1] | Tube | |
| 8 | VOE14517941 | [1] | Bushing |
| VOE14517941 | [1] | Bushing | |
| VOE14511731 | Bushing | ||
| 9 | VOE14560205 | [2] | Seal |
| 10 | VOE14510796 | [1] | Rod |
| VOE14550781 | [1] | Rod | |
| VOE14514571 | Rod | ||
| VOE14550892 | Rod | ||
| 11 | VOE14517941 | [1] | Bushing |
| VOE14517941 | [1] | Bushing | |
| VOE14511731 | Bushing | ||
| 12 | VOE14560205 | [2] | Seal |
| 13 | SA9481-11003 | [1] | Nipple |
| 14 | SA9612-10540 | [1] | Bearing |
| 15 | [1] | Piston | |
| Piston | |||
| 16 | VOE14510456 | [1] | Seal |
| 17 | SA9565-11500 | [2] | Wear ring |
| 18 | SA9568-01500 | [2] | Seal |
| 19 | SA1146-03190 | [1] | Cushion |
| 20 | SA1146-03170 | [1] | Cushion |
| 21 | SA9016-22412 | [15] | Hex. socket screw |
| 22 | VOE13963059 | [1] | Set screw |
| VOE14535763 | [1] | Screw | |
| VOE13963059 | Set screw | ||
| 23 | VOE990651 | [2] | O-ring |
| 24 | VOE990594 | [1] | O-ring |
| 25 | SA9556-10500 | [1] | Retaining ring |
| 26 | SA9557-09500 | [1] | Retaining ring |
| 27 | SA9563-21050 | [1] | Seal |
| 28 | SA9564-21050 | [1] | Seal |
| 29 | SA9566-11400 | [1] | Back-up ring |
| 30 | SA9566-31400 | [1] | Back-up ring |
| 31 | SA9566-40900 | [2] | Back-up ring |
| 32 | SA9567-21050 | [1] | Back-up ring |
| 100 | VOE14513716 | [1] | Sealing Kit |
Main Products:
| Main Products |
| Engine parts: Engine parts: Cylinder block, Cylinder head, Crankshaft, Camshaft, Connecting rod, Engine assy, Injector, Fuel injection pump, Oil pump, Feed pump, Oil cooler, Filter, Turbo charger, Starter, Alternator, Water pump, Fan blade, Liner kits, Bearings, Valves, Gasket kit, etc. |
| Hydraulic parts: Hydraulic pump, Hydraulic spare parts, Travel motor, Swing motor, Travel gearbox, Swing gearbox, Main control valve, Hydraulic cylinder assy, Gear pump, Hydraulic motor, Swivel/Center Joint, Conversion kit, etc. |
| Cabin parts: Excavator cabin, Cabin door, Side door panel, Cabin seat, Cabin glass, Engine cover, Tool box, Door lock, etc. |
| Electric Parts: Controller, Monitor, Panel, Throttle motor, Solenoid valve, Sensor, Switch, Stop solenoid, Thermostat, Harness, etc. |
| Other Parts: Seal kit, Floating seal, O-ring box, Engine cushion, Gear, Radiator, Hydraulic oil cooler, etc |
Parts exploded view
Company warehouse
FAQ
1. Q: Are you a manufacturer or trader?
A: We are both in manufacturer and trader, have more than 10 years
of industry experience.
2. Q: Can i make a small order first?
A: Yes, of course.
3. Q: If we let the product make a change of the size, can you
offer the
seal kit for this size?
A: Yes, just send the machine model, part number and the change
of size to us, we can make it.
4. Q: Have you support the OEM or not?
A: Sure, we support the OEM,BULLDOG or as required.
5. Q: How can i pay the goods?
A: For the payment, we support the PayPal, Western Union, Money Gram, T/T in advance, L/C at sight, etc
6. Q: How to ship the products?
A: For the shipment, we support the DHL Fedex EMS UPS or by Air/ Sea., if you have the agent in china, we can contact your agent according to your request.
7. Q: What’s the delivery time?
A: The goods can be shipped at 2-5 working days after receiving payment.
| VOE14511669, 14511669 |
