Chongqing Haodong Technology Co., Ltd. |
|
50w Electrostatic Powder Spray Machine Powder Spray Machine For
Industrail System
Product Introduction
The spray equipment uses an automatic current feedback circuit and
adds a pulse control circuit. The gas control part adopts two-stage
gas source filtration, voltage regulation and air pressure
adjustment, all designed as preset adjustments. The powder output
is more uniform, the atomization is better, and the dead angle is
much better.
Use the digital panel forwarding key. It can change the pulse and
normal function, and voltage current display function. With a very
high powdering rate and the best coating quality.
Product Specification
MODEL | THD001 | THD002 | THD003 | THD004 |
Dimension | 64*46*98 | 64*46*98 | 64*46*98 | 64*46*98 |
Weight | 32 | 31 | 31 | 32 |
Input power | 50 | 34 | 34 | 34 |
Input voltage | 110/220VAC | 110/220VAC | 110/220VAC | 110/220VAC |
Frequency | 50-60Hz | 50-60Hz | 50-60Hz | 50-60Hz |
Max Output voltage | 0-100KV | 0-100KV | 0-100KV | 0-100KV |
Hopper volume | 55L | 55L | 55L | 55L |
Polarity | Negative | Negative | Negative | Negative |
characteristics
1. You must read the instructions carefully before use.
2. The operator must wear appropriate labor protection supplies
before operation.
3. The spray equipment and the workpiece to be sprayed must be well
grounded in the work site.
4. Gloves are not allowed when the worker is in contact with the
spray gun.
5. No smoking is allowed in the workplace, and fire is prohibited.
6. After work finished, turn off the power before cleaning the gun
and replacing parts.