flanged self-lubricating bearing DIN 17662 CuSn8P

The Wrapped Flange Bronze Bushing with High Load CuSn8P DIN 17662 is a robust and durable component designed to handle heavy loads and provide reliable performance in various industrial applications. Made from CuSn8P bronze, a copper-based alloy with high tin content, it offers excellent corrosion resistance, wear resistance, and strength.

The wrapped flange design of the bushing provides enhanced support and stability, allowing it to withstand high loads and pressures without deforming or failing. This makes it suitable for use in demanding environments and heavy-duty machinery.

The bushing also meets the DIN 17662 standard, ensuring its compliance with international quality and performance requirements. This guarantees its reliability and suitability for use in a wide range of applications, including but not limited to automotive, construction, and mining industries.

Overall, the Wrapped Flange Bronze Bushing with High Load CuSn8P DIN 17662 is an excellent choice for those seeking a durable and high-performance bushing solution that can handle heavy loads and demanding conditions.

Flange Bronze Bushing & Bearing Types

Bronze wrapped bushes, Reduced Lubrication Burden, Applicable to Severe Environment, Easy Installation. Bronze Bushings · Reliable Quality assuring high strength ...

Flange Bearing Plain Bushes Flange Bushes Metric Standard Flange Bushing(DIN1494)  Series, BRM80, Bronze Bearing With Flange & Holes Through, The bearing is intended for oil or grease lubrication. Available with or without flange. The cusn8 bronze sliding surface has rhomboid lubrication pockets. The bronze bushing sliding surface has holes going right through.

FB092 Flange Bearing Plain Bushes WB802WF Series is a thin wall bearing, which is made of bronze material and processed evenly and orderly oil filling holes.

Bronze Bearing

Bronze sliding bearings in accordance with DIN17662 CuSn8.

The bearing is intended for oil or grease lubrication.

Available with or without flange.

The bronze sliding surface has rhomboid lubrication pockets.

The bronze sliding surface has holes going right through.

Properties
High load ability level
Compact dimensions
High chemical resistance in aggressive environments
High thermal conductivity
Wide working temperature range
Easy to fit and maintain

Technical instructions:

Maximum permissible surface pressure 150 N/mm2 (static)

Maximum permissible surface pressure 60 N/mm2 (dynamic)

Minimum working temperature -40°C

Maximum working temperature +150°C

Maximum sliding speed 2.5 m/s (grease-lubricated)

More technical specifications

We’re experts in bronze

The bronze bushes have through-holes on bushes, which have a greater capacity to collect the lubricant compared with the indentations. These indents serve as lubricant reservoirs to rapidly build up a lubrication film in the start movement and therewith reduce the start friction.

slide bronze plain bearings with or without flange are intended for radial and axial movements. The bearings are wrapped of a cold formable homogenous.

Bronze Bearing With Flange & Holes Through Plain Bushings WB802 Lubricating Holes Bronze Bushes After assembly, it is injected with lubricating oil and used with end face sealing. The bearing has the advantages of large oil storage, convenient installation, small design volume, and can replace the use of the copper sleeve, can greatly reduce the cost, the product has been applied to conveyor, elevator, hoist, leveling machine and another medium load, low-speed occasions.

WB802WF Series FB092 bronze bearing is thin wall bearing, which is made of bronze material and processed evenly and orderly oil filling holes. After assembly, lubricating oil is injected and end face seal is configured for use. The bearing has the advantages of large oil storage, convenient installation, small design volume, and can replace the use of copper bushing, can greatly reduce the cost.
Widely used in lifting machinery, construction machinery, car tractor chassis, machine tool industry, mining machinery, car drive shaft, car change gear box, generator, crane, metallurgical machinery and conveyor, lift, rolling field machine, leveling machine and other medium load, low speed occasions.

Material

• Support material CuSn8P (DIN 17662)
• alternative CuSn6P available

Plain Bearing Bushes

Flange Bearing Plain Bushes

FB090 bronze bearing is made of high density copper alloy strip with special formula. The surface can be rolled diamond or hemispherical oil holes and grooves as required by users. It has the advantages of high density, large bearing capacity, good wear resistance, long service life, etc., to replace the traditional casting copper sleeve, can reduce the mechanical volume, reduce the cost. Widely used in lifting machinery, construction machinery, car tractor chassis, machine tool industry, mining machinery, car drive shaft, car change gear box, generator, crane, metallurgical machinery and conveyor, lift, rolling field machine, leveling machine and other medium load, low speed occasions.

Technical Parameters

Tolerance Details

• Housing ØH7
• Bushing inner-Ø after mountingH9
• Shaft tolerancef7 to h8

Properties

• Economic solution for bronze bearing application due to a thin wall thickness. High load capability and good stability with low abrasion. Suitable for rough working conditions, good corrosion resistance. Lubrication holes for maximum grease storage and the lowest maintenance intervals.

The bearing is intended for oil or grease lubrication. Available with or without flange. 

The BRM10’s sliding surface has rhomboid lubrication pockets. The BRM80’s sliding surface has holes going right through.