VIIPLUS INTERNATIONAL |
|
The MPTZ-16 Copper Flanged Graphite Sleeve is a precision-engineered component designed specifically for use in connecting rods. Constructed from high-quality copper and graphite materials, this sleeve offers exceptional durability and performance.
The flanged design of the sleeve provides enhanced stability and secure attachment to the connecting rod, ensuring reliable operation even under high loads and extreme conditions. The graphite material adds lubrication properties, reducing friction and wear, while the copper contributes to the overall strength and corrosion resistance of the sleeve.
The MPTZ-16 Copper Flanged Graphite Sleeve is an ideal choice for connecting rod applications in various industries, including automotive, machinery, and heavy equipment. Its precision manufacturing ensures a perfect fit and smooth operation, maximizing the efficiency and lifespan of the connecting rod assembly.
MPTZ-16 Flanged Graphite Copper Sleeve Guide Sleeve
High tensile brass Bushings, the chemical formula is ZCuZn25Al6Fe3Mn3, mechanical properties are zinc content is different, mechanical properties are not the same, pressure processing performance has good plasticity, can withstand hot and cold processing.
MPTZ-16 Round Flanged Graphite Copper Sleeve Guide Sleeve High Strength Brass Copper Sleeve Standard Cut Edge Oil Free Sleeve Shaft
Flanged Graphite Bronze Bearing Product introduction
Due to the requirements of special production technology, some key equipment in industrial and mining enterprises are running under extremely bad working conditions. Due to heavy equipment, high ambient temperature, large dust or air containing acid corrosive gas. Lubrication of equipment brings a lot of problems, friction and wear is serious, most of the traditional oil, grease lubrication is still used, but in fact these industrial and mining conditions have exceeded the scope of oil, grease lubrication. It is very easy to bite or kill bearings and other friction pairs. Causes severe parts wear and damage, often resulting in equipment out of service. Therefore, the copper-based perforated graphite insert solid self-lubricating composite copper sleeve with graphite, copper flange, graphite, copper gasket, sliding bearing bushing, discharge guide bushing, GDB sliding bearing, oil-free bearing, graphite copper sleeve uses copper alloy as the basic material. According to the working conditions, holes are processed in a certain proportion of the working face and filled with solid lubricant. The high strength copper alloy provides a high bearing capacity while the solid lubricant can form a low friction. Under dry friction conditions, we design a layer of pre-lubrication film on the bearing surface to ensure that the solid lubricant is transferred to the coupling in the shortest time and an effective solid lubrication film is formed. Graphite-inset self-lubricating sliding bearing copper sleeve has more advantages than conventional oiling, such as: 1: can reduce the cost budget for the company 2: simplified installation 3: do not need frequent maintenance 4: no refueling 5: corrosion resistance greatly plus 6 wear resistance 7: light weight 8: low noise and so on.
MPTZ16-15 Flanged Graphite Bronze Bearing
MPTZ16-20 Flanged Graphite Bronze Bearing
MPTZ16-25 Flanged Graphite Bronze Bearing
MPTZ16-30 Flanged Graphite Bronze Bearing
MPTZ16-35 Flanged Graphite Bronze Bearing
MPTZ16-40 Flanged Graphite Bronze Bearing
MPTZ16-50 Flanged Graphite Bronze Bearing
Cast tin bronze 10-1 (ZCUSN10P1) corresponding to other national grades are as follows:
International standard ISO: CUSN11P
British Standard BS: PB1
French standard NF: CUSN12P
Japanese standard JIS: PBC2
American Standard ASTM: C90710
The chemical composition of cast tin bronze 10-1 copper sleeve is as follows:
alloy
tin bronze | /% | /% | |||||||||
Sn | Zn | Pb | P | Ni | Ni | Zn | Pb | Mn | 总和 | ||
ZCuSn10P1 | 10-1 | 9.0~11.5 | — | — | 0.5~1.0 | — | 0.10 | 0.05 | 0.25 | 0.05 | 0.75 |
Implementation of the national standard number: GB/T 1176-1987;
Characteristics: the tin bronze 10-1 copper sleeve cast by Chenhan bearing has high hardness, excellent wear resistance, is not easy to produce the phenomenon of killing, has good casting performance and cutting performance, and has good corrosion resistance in atmosphere and fresh water.
Application of tin bronze 10-1: it can be used for wear-resistant parts, such as connecting rod, bushing, bearing bush, gear, turbine, etc., working under high load (20MPa or less) and high sliding speed (8m/s).