VIIPLUS INTERNATIONAL |
|
High load capacity bronze sleeve bushings, crafted from CuSn8 material, are engineered to withstand extreme loads and demanding conditions. The CuSn8 bronze, a highly wear-resistant alloy, ensures exceptional durability and long-term performance.
The lubrication indents, strategically placed within the bushings, provide a means for effective lubrication, reducing friction and heat generation. This design feature not only enhances the bushings' operational efficiency but also extends their service life.
These bronze sleeve bushings are suitable for a wide range of industrial applications, including machinery, equipment, and heavy-duty operations where high loads and precision are paramount. Their robust construction and lubrication capabilities make them a reliable choice for ensuring smooth and efficient operation under challenging conditions.
In summary, high load capacity bronze sleeve bushings made of CuSn8 with lubrication indents offer a robust and long-lasting solution for industrial applications that require exceptional performance and durability.
Product introduction
The bronze bearing is made of a high-density copper alloy strip
with a special formula. The surface can be rolled with a diamond or
hemispherical oil hole and oil groove according to the user's
requirements. It has the advantages of high density, large bearing capacity, good wear resistance, long
service life, etc., to replace the traditional cast copper sleeve, can reduce the mechanical volume and reduce the cost. Has been widely used in lifting machinery, construction
machinery, car tractor chassis, machine tool industry, and mining
machinery, but also can be made into bearing bush, flanged bushing,
thrust gasket, and ball bowl, and other forms.
Bearing forms available in standard dimensions
Cylindrical bushes
Bearing forms made to order: cylindrical bushes with non-standard dimensions, flanged bushes, sliding plates, customized bearing designs
Mechanical handling and lifting equipment, hydraulic cylinders, pneumatic equipment, medical equipment, textile machinery, agricultural equipment, etc.
Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents
Bushing ID 90mm, OD 95mm, L= 80мм, OD of the flange - 110мм, type F, DIN 1494 (CuSn8P)
CuSn8 with
composition
Sn 8 %
P < 0.05 %
Cu Rest
Operating Performance | |
Dry | Poor |
Oil lubricated | Good |
Grease lubricated | Good |
Water lubricated | Poor |
Process fluid lubricated | Poor |
Standard Dia | O.D.Size | Housing Bore | I.D.Size |
|
---|---|---|---|---|
10~18 | +0.065 +0.030 | +0.018 0 | +0.046 0 | - 0.016 - 0.043 |
18~30 | +0.075 +0.035 | +0.021 0 | +0.052 0 | - 0.020 - 0.020 |
30~50 | +0.085 +0.045 | +0.025 0 | +0.062 0 | - 0.025 - 0.064 |
50~80 | +0.100 +0.055 | +0.030 0 | +0.074 0 | - 0.030 - 0.076 |
80~120 | +0.120 +0.070 | +0.035 0 | +0.087 0 | - 0.036 - 0.090 |
120~180 | +0.170 +0.100 | +0.400 0 | +0.100 0 | - 0.043 - 0.106 |
180~250 | +0.210 +0.130 | +0.046 0 | +0.115 0 | - 0.050 - 0.122 |
250~315 | +0.260 +0.170 | +0.052 0 | +0.130 0 | - 0.056 - 0.137 |
Technical Data | |
---|---|
Material: | Cu – 91.3% Sn – 8.5% P – 0.2% |
Standard: | Cu Sn8. DIN 17662. CW453K |
Sliding layer (thickness): | Homogeneous |
Tensile strength Rm: | 450N/mm² |
Yield strength Rp 0.2: | 250N/mm² |
Elongation in % A10: | 0.4 |
Hardness: | 90-120 HB |
Friction coeff: | 0.08-0.25µ |
Thermal conductivity: | 60W/m·K |
Temperature range: | -100°C/200°C |
Max. load static: | 120 N/mm² |
Max. load, dynamic: | 40 N/mm² |
Max. sliding speed (w.lubr.): | 2.5 m/s |
Pv-value, Mpa x m/s, kont / int: | 2.8 |
Counter material | |
Recommended shaft hardness: | >210HB |
Rec. shaft surface roughness (Ra) | 1.6 |
Recommended tolerance: | e7-f7 |
House: | H7 |
I.D. | O.D. | f 1 | f 2 | L 0 -0.40 | ||||||||||||||
10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 70 | 80 | ||||||||
10 | 12 | 1010 | 1015 | 1020 | ||||||||||||||
12 | 14 | 1210 | 1215 | 1220 | ||||||||||||||
14 | + 0.043 0 | 16 | + 0.065 + 0.030 | 0.5 | 0.3 | 1410 | 1415 | 1420 | 1425 | |||||||||
15 | 17 | 1510 | 1515 | 1520 | 1525 | |||||||||||||
16 | 18 | 1610 | 1615 | 1620 | 1625 | |||||||||||||
18 | 20 | 1810 | 1815 | 1820 | 1825 | |||||||||||||
20 | 23 | 2010 | 2015 | 2020 | 2025 | |||||||||||||
22 | 25 | + 0.075 | 0.8 | 2210 | 2215 | 2220 | 2225 | |||||||||||
24 | + 0.052 | 27 | + 0.035 | 2415 | 2420 | 2425 | 2430 | |||||||||||
25 | 0 | 28 | 2515 | 2520 | 2525 | 2530 | ||||||||||||
28 | 32 | 2815 | 2820 | 2825 | 2830 | |||||||||||||
30 | 34 | 3015 | 3020 | 3025 | 3030 | 3035 | 3040 | |||||||||||
32 | 36 | + 0.085 | 1.0 | 0.6 | 3215 | 3220 | 3225 | 3230 | 3235 | 3240 | ||||||||
35 | 39 | + 0.045 | 3515 | 3520 | 3525 | 3530 | 3535 | 3540 | ||||||||||
40 | + 0.062 0 | 44 | 4020 | 4025 | 4030 | 4035 | 4040 | 4050 | ||||||||||
45 | 50 | 4520 | 4525 | 4530 | 4535 | 4540 | 4550 | |||||||||||
50 | 55 | 5020 | 5025 | 5030 | 5035 | 5040 | 5050 | 5060 | ||||||||||
55 | 60 | 5520 | 5525 | 5530 | 5535 | 5540 | 5550 | 5560 | ||||||||||
60 | 65 | + 0.100 | 1.2 | 0.8 | 6025 | 6030 | 6035 | 6040 | 6050 | 6060 | 6070 | |||||||
65 | + 0.074 | 70 | + 0.055 | 6530 | 6535 | 6540 | 6550 | 6560 | 6570 | |||||||||
70 | 0 | 75 | 7030 | 7035 | 7040 | 7050 | 7060 | 7070 | 7080 | |||||||||
75 | 80 | 7530 | 7535 | 7540 | 7550 | 7560 | 7570 | 7580 | ||||||||||
80 | 85 | + 0.120 + 0.070 | 1.4 | 8030 | 8035 | 8040 | 8050 | 8060 | 8070 | 8080 |