Grease grooves are mandatory for cast bronze bushings bearings as
they require high greasing intervals. viiplus can design the right
bronze bushings parts groove type system for our clients’
applications. Sleeve or flange size, mm. Therefore, it is also
important to understand whether the bronze bushings are greased
through the pin or the housing. Greasing points on the housing will
require additional grooves and lubricatings holes on the outer
diameter. Spiral and “figure of 8” groove systems are among the
most common ones.soild bronze bushing bearings are considered as
high-maintenance materials.
Slide Bearing - Solid turned bronze bushing, heavy-maintenance, DIN 1850/ISO 4379, Heavy maintenance, groove type or bronze with lubricant plugs embedded
viiplus grooving bronze bushing have a lot of grooving kind, use suitable grooving can produce oil
film in the matching parts, so as to better protect the
corresponding parts, reduce its friction, reduce loss, improve
Solid Bronze Alloy Bearings according to ISO 4379 product life,
reduce the maintenance cost of the machine, we have production
equipment, and a large number of inventory, can be used for your
urgent need or normal consumption,you can contact us for a free
quote.
Featrue
• Conventional bearing material for lubricated applications in
general engineering applications
• Suitable for oil and grease lubrication
Bearing forms made to order: cylindrical bushes with bronze alloy
according to ISO 4379, special parts according to ISO, DIN or
customer design, special alloys
Characteristic
Cast bronze bearing is made of all kinds of centifugal cast bronze
material with different oil grooves. They are widely used in all
kinds of industries such as agricultural machines,cranes,spring
bolt,ransmission systems,turning axis and ect.
1. Can work without oil for a long time;
2. It is more suitable for heavy load and low-speed working
conditions, with good wear resistance and very low friction
coefficient;
3. Suitable for reciprocating motion, rotation, intermittent motion
and other occasions where oil film is difficult to form;
4. Corrosion resistance and anti-aging;
5. Suitable for temperature range from -40 ℃ to 300 ℃;
6. Compared with the rolling bearing, the thickness is thin, saving
space and suitable for complex situations.
Chemical compositon & Properties
C86300 Manganese Bronze
Material | CuZn25Al6Fe3Mn3 | | | |
Properties | Unit | Value | Unit | Value |
Tensile strength | Mpa | 755 | psi | 110,000 |
Elongation | % | 12 | % | 12 |
Hardness | HB | 210 | HB | 210 |
C93200 Manganese Bronze
C95400 Manganese Bronze
Chemical Compositon(%) |
Cu | Zn | Al | Fe | Mn | Ni | Pb | Si | Sn | Other |
>83 | / | 10.0-11.5 | 3.0-5.0 | 0.50 | 1.50 | / | / | / | 0.50 |
Properties |
Tensile Strength(Mpa) | Yield strength(Mpa) | Elongation(%) | Hardness(HB) |
586 | 221 | 12 | 170 |
Cast bronze bushing machining copper sleeve from the technical and
cost level to provide excellent bearing solutions. Copper sleeve
with high bearing capacity, light weight, corrosion resistance and
other characteristics, according to the bearing design life and
application, we can provide different kinds of alloy materials to
meet the corresponding application requirements. As a machined Solid Bronze Alloy Bearings according to ISO 4379
, the tolerance grade of the Solid Bronze Alloy Bearings according to ISO 4379 is much higher than that of the rolled bearings.
Applications
This type of bearing can be used in dry environments, with high
temperatures, high pressure, corrosive, aquatic or other chemical
environments when oil cannot be introduced. It is widely used in
automotive Solid Bronze Alloy Bearings according to ISO 4379 lines, water engineering, floodgates, the plastics industry,
subsequent casting machines, steel rollers in the metallurgical
industry, mineral machines, ships, turbogenerators, hydraulic
turbines and injection molding machines.
With the advantages of lightness, low noise and self-lubricating
characteristics, VIIPLUS bearings are widely used in the automotive
industry and applications are still in rapid development.
Currently, there are more than 50 rings used in each passenger car
and more and more traditional needle bearings, sintered bearings
are replaced by self-lubricating bearings. In addition to the
bearing,
· Steering & Suspension System
· Power Transmission System
· Body System
· Other
·Conventional bearing material for lubricated applications in
general engineering applications
·Suitable for oil and grease lubrication
Our Service
1. We can produce non-standard dimensins according to your
requirements;
2. Competitive price
3. High quality
4. Customer's drawing or samples accepted
5. Small order accepted
6. Choose the different package to your needs
7. Customized the marks based on your requirment
AVALIBILITY
Bearing forms made to order: cylindrical bushes with bronze alloy
according to ISO 4379, special parts according to ISO, DIN or
customer design, special alloys
We have many other Solid Bronze Alloy Bearings according to
ISO 4379 products, please contact us for more innformation.