The JF800 and JF720 Grooves Split Type Bimetal Bearing Bushes are designed for maintenance-free operation, providing exceptional durability and performance. These bearings incorporate a bimetallic structure that consists of an outer steel shell and an inner lining of a wear-resistant alloy, such as bronze or brass.

The split design of these bearing bushes allows for easy installation and removal, without the need for dismantling the entire machinery. This significantly reduces downtime and maintenance costs, making them ideal for use in various industrial applications where reliability and longevity are critical.

The inner alloy lining offers superior resistance to wear, galling, and seizure, even under heavy loads and high-speed conditions. The outer steel shell provides structural strength and rigidity, ensuring that the bearings can withstand the rigors of continuous operation.

With their maintenance-free design, the JF800 and JF720 Grooves Split Type Bimetal Bearing Bushes are designed to operate reliably for extended periods without the need for routine lubrication or replacement. This makes them a cost-effective and efficient choice for reducing downtime and improving the overall performance of machinery.

Bimetal Bearing Bushes Supplier - High Quality Factory Price
 

Bimetal bushing lead-plated material made of leaded bronze with a steel back, suitable for oil-lubricated applications. This material has a high load-bearing capacity and good fatigue properties. It is widely used in automotive applications such as compressors, steering gears, power steering, pedal bushings, kingpin bushings, tailgate trunnions, mechanical handling and lifting equipment, hydraulic motors and pumps, agricultural machinery, etc.

Bimetal Bushings Structure

1.Bi-metal Sintered bronze layer: Good wear resistance and excellent load carrying capacity.

2.Steel backing:Setting the foundation of the bushings,the steel backing provides exceptional stability, load carrying and heat dissipation characteristics.

This bimetallic bushing material is recommended for use in medium speed and medium load conditions with oil or grease lubrication. It is widely used for engine tie rod ends, Kingpin bushings, undercarriage rollers, construction machinery hydraulic cylinder cylinders and agricultural machinery ball joint bearings. Because this material contains lead, certain parts may not be used in accordance with specific laws or regulations.

Bimetal Bearing for bulldozers, excavators, transport aircraft support wheel 

JF800 2515 size 25*28*15

Diameter Range : 15 to 130 mm,JF800 Bimetal Bearings
Bimetal bearing is the bearing made of bimetal rolled shaft sleeve and bimetal gasket by friction welding, which can bear both radial load and axial load. Bimetal material is low carbon steel plate as the substrate, the surface of a layer of copper powder sintering, copper layer in the use of wear reduction.
 
The 800 Bimetallic Bushing is based on the carbon steel in which the copper powder is sintered on the surface using CuPb10Sn10 or Cusn6zn6zn6pb3 material. This product is one of the most powerful load capacities of double alloy bearings, the compensating bridge bushing and the seal of heavy-duty vehicles. The moving wheel and the jockey wheel of the bulldozer; All sheet steel bushings use this product. It is a widely used high load plain bearing with low load.
 

JF800 Bushes Grooves Indentations

Standard Tolerance Dimension Table

APPLICATION 

A mid-load capacity & middle anti-fatigue
Applied in middle speed,high impact conditions
Good anti-corrosion,and sliding capability
The products can be use in undercarriage parts and engines of auto industry, construction machine,etc.