Active Member
|
[China]
Address: Industry Park. JS, ZJ, China. 314100
Contact name:Tiffany
VIIPLUS INTERNATIONAL |
|
|
The Chemical Resistance Thrust Washer, model Wc10du, is a round composite thrust washer that is specifically designed for applications requiring high chemical resistance and low noise operation. Constructed from a unique combination of steel, bronze, and PTFE (Polytetrafluoroethylene), this thrust washer offers superior performance in harsh environments.
The steel bronze composite material provides exceptional strength and durability, while the PTFE coating enhances the chemical resistance and reduces friction. This results in a thrust washer that can withstand harsh chemicals, acids, and other corrosive substances with minimal wear and tear.
The round design of the Wc10du thrust washer allows for easy installation and integration into various mechanical systems. Its composite construction also ensures a smooth and quiet operation, making it ideal for applications where noise reduction is a priority.
Overall, the Chemical Resistance Thrust Washer Wc10du is a reliable and long-lasting solution for applications requiring high chemical resistance, low noise, and superior performance.
Chinese in high performance Sliding bearing solutions,High quality Thrust slide washer PTFE lead free, from VIIPLUS, premium brand
VIIPLUS Provide non-standardized products:Cylindrical bushes, flanged
bushes, thrust washers, flat strip material, half bearing, wear
plate.
Oil-free wear resistant sliding thrust bearing gasket
High precision high speed wear resistance thrust oilless Washer low noise
THRUST WASHER / ROUND / COMPOSITE / PTFE
Quality bad?Size is uncomplete?Tolerance is out of tolerance?delivery date is not on time?
VIIPLUS Bearing will help you slove them.
High precision & Small tolerance
Max. load | Static | 250N/mm2 | Max.speed | Dry running | 0.08~0.20 | |
Very low speed | 140N/mm2 | Hydrodynamicoperation | 0.02~0.08 | |||
Rotatingoscillating | 60N/mm2 | Frictioncoefficient | Dry | 2m/s |
| |
Hydrodynamic | >2m/s |
| ||||
Max. PVdryrunning) | Short-termoperation | 3.6N/mm2*m/3 | Thermal conductivity | 42W(m*K)-1 |
| |
Continuousoperation | 1.8N/mm2*m/3 |
| ||||
PV max. hydrodynamic | -195℃~+280℃ | Coefficient of thermalexpansion | 11*10-6*K-1 |
| ||
The quality of bearing installation will affect the precision, life
and performance of the bearing.Therefore, in the installation and
use process, pay attention to the following points
Keep bearing and working environment clean
Clean the working area with clean tools or auxiliary tools. The
bearing can not be opened until it is in use.
Keep the bearings clean during operation
Use appropriate tools
Installation should be good plastic not easy to fall off the
auxiliary tools.
Attention should be paid before mounting the bearing
Fully inspect the shaft and bearing body, and determine wh the
mating surface of shaft and bearing body has bump or bump, yes
Dust or mold sand on bearing housing surface, etc.To avoid
collision during installation, the shaft
And the working surface of the bearing body shall be coated with a
small amount of lubricating oil.
Bearing mounting
We suggest to use pressing and matching method, and do not use
hammer and other tools to directly hit the bearing end face
Avoid bearing damage.Small batch installation, you can use the
sleeve pressure bearing face, hammer beating sleeve, so that the
balanced installation of the bearing in place.
Bearing forms available in standard dimensions
Metric bearings and imperial bushings made to order: Standard
bushing forms in special sizes, half-bushings, stamped/deep drawn
shapes, bearings with locating notches, lubricant holes and
grooves, customized designs
