VIIPLUS INTERNATIONAL |
|
CuSn8 Oil Shaft Diameter Wrapped Bronze Sleeve Bushings with Lubrication Pockets refer to bushings made of CuSn8 bronze alloy that are wrapped around an oil shaft of a specified diameter. These bushings feature lubrication pockets, which are designed to hold and distribute lubricant effectively, ensuring smooth and reliable operation of the shaft. The CuSn8 alloy offers excellent wear resistance, corrosion resistance, and mechanical strength, making it a suitable material for high-performance bushings. The wrapped design allows for easy installation and replacement while maintaining a secure fit on the shaft.
According to the product requirement, different conditions of lubrication hearings, at present there is no oil production and operation of thousands of different specifications of products, the products of export, and the accident and Southeast Asia, etc countries and regions.
Dimensions of the strip for wrapped bushings Standard thicknesses 1.0/1.5/2.0/2.5/3.0 mm
200x205x90. 200/205x90 WB800. FB090 6040. 60x65x40. 60/65x40 WB800
WB702-bearings with or without flange are intended for radial and axial movements. The bearings are manufactured of a cold formable homogenous bronze, which because of this will obtain exceptional material properties. The execution of the flange permits that the bearing also can carry axial loads. The standard sizes are fitted with holes, which are dispersed in a special way over the whole bearing surface.
These holes serve as lubricant reservoirs I .a. to rapidly build up a lubrication film in the moment of start and therewith reduce the start friction. The properties of the WB702-material, tog with the procedure of wrapping and calibration, make this type of bearing especially suitable for constructions, where medium or high loads and relatively slow movements are occurring.
Wrapped bronze straight bushing requiring low-maintenance alternative bronze bushing PRM FB090-8080.pdf Bronze Sleeve & Flanged Bearings.
Power Transmission - Mechanical components Bearing and Linear Guide Bronze plain bearing
High load capacity
Can be used in difficult circumstances.
Excellent lubrication properties due to lubrication holes.
Material outer sheath | Bronze (CuSn8) |
Attribute | Value |
---|---|
d (mm) | 80 |
D (mm) | 85 |
h (mm) | 80 |
Cold-formed homogenous bronze bearing,diamond-shaped lubrication indents (grease) and incorporate holes (oil).This type of bushing is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machine tools, and some mineral engines.
The bronze sleeve bushing made to order from china ranges is made entirely of CuSn8/CuSn6. The working surface is rolled with diamond indentations or stamped with oil grooves. On assembly or during operation the indentations can be filled with grease or oil which acts as a reservoir creating excellent long term lubrication. wrapped bronze sliding bearing, perforations, fb090&fb092 low-maintenance
CuSn8/CuSn6 WB702 & WB700 Series bushings' biggest feature is the thin-walled structure, which does not occupy a large installation space. Sleeve material specially formulated high-density copper alloy strip. Compared with the traditional casting of copper, with high density, no gas shrinkage, carrying capacity, but also wear resistance, fatigue, and other advantages. Bushings manufactured using advanced tooling can be processed into a variety of engineering conditions apply oil hole, oil pit, sump friction surface strip, so that the sleeve can store a lot of grease in use, to extend the refueling interval, effective increased service life.
Bronze-based Rolling Bearings Sleeve Bearing Special dimensions and imperial sizes are available on request Made to order From China. The bronze sleeve bushes are wrapped from a cold-formed homogenous bronze CuSn8 with oil holes. These holes serve as lubricant reservoirs to rapidly build up a lubrication film at the start of the movement and thereafter reduce the running friction. Wrapped bronze bearings CuSn8 & CuSn6.5 are especially suited to Agricultural vehicles, Lifting gear, Offshore, Excavators. Click here to go to our CUSN8 FLANGE SLEEVE BRONZE SPILT BUSHING.pdfand The plain bearings sleeve bushings standard sizes Specifications of Oil Holes & Bearing Tolerance
Special CuSn8 & CuSn6 Bronze Slding bearings dimensions and imperial sizes are available on request
FB092 TIN BRONZE SLEEVE BUSHINGS 8060 SLIDING BEARINGS OIL HOLES.
(80x85x60)
FB092 TIN BRONZE SLEEVE BUSHINGS 2825 SLIDING BEARINGS OIL HOLES.
(28x31x25)
FB092 TIN BRONZE SLEEVE BUSHINGS 8080 SLIDING BEARINGS OIL HOLES.
(80x85x80)
FB092 TIN BRONZE SLEEVE BUSHINGS 7070 SLIDING BEARINGS OIL HOLES.
(70x75x70)
FB092 TIN BRONZE SLEEVE BUSHINGS 6060 SLIDING BEARINGS OIL HOLES.
(60x65x60)
FB092 TIN BRONZE SLEEVE BUSHINGS 6040 SLIDING BEARINGS OIL HOLES.
(60x65x40)
FB092 TIN BRONZE SLEEVE BUSHINGS 6035 SLIDING BEARINGS OIL HOLES.
(60x65x35)
FB092 TIN BRONZE SLEEVE BUSHINGS 5060 SLIDING BEARINGS OIL HOLES.
(50x55x60)
FB092 TIN BRONZE SLEEVE BUSHINGS 5030 SLIDING BEARINGS OIL HOLES.
(50x55x30)
FB092 TIN BRONZE SLEEVE BUSHINGS 4560 SLIDING BEARINGS OIL HOLES. (45x50x60)
FB092 TIN BRONZE SLEEVE BUSHINGS 4550 SLIDING BEARINGS OIL HOLES.
(45x50x50)
FB092 TIN BRONZE SLEEVE BUSHINGS 4050 SLIDING BEARINGS OIL HOLES.
(40x44x50)
FB092 TIN BRONZE SLEEVE BUSHINGS 4030 SLIDING BEARINGS OIL HOLES.
(40x44x30)
FB092 TIN BRONZE SLEEVE BUSHINGS 3550 SLIDING BEARINGS OIL HOLES.
(35x39x50)
FB092 TIN BRONZE SLEEVE BUSHINGS 3040 SLIDING BEARINGS OIL HOLES.
(30x34x40)
FB092 TIN BRONZE SLEEVE BUSHINGS 3030 SLIDING BEARINGS OIL HOLES.
(30x34x30)
FB092 TIN BRONZE SLEEVE BUSHINGS 3025 SLIDING BEARINGS OIL HOLES.
(30x34x25)
FB092 TIN BRONZE SLEEVE BUSHINGS 2550 SLIDING BEARINGS OIL HOLES.
(25x28x50)
FB092 TIN BRONZE SLEEVE BUSHINGS 2030 SLIDING BEARINGS OIL HOLES.
(20x23x30)
FB092 TIN BRONZE SLEEVE BUSHINGS 2020 SLIDING BEARINGS OIL HOLES.
(20x23x20)
FB092 TIN BRONZE SLEEVE BUSHINGS 1820 SLIDING BEARINGS OIL HOLES.
(18x20x20)
FB092 TIN BRONZE SLEEVE BUSHINGS 1625 SLIDING BEARINGS OIL HOLES.
(16x18x25)
FB092 TIN BRONZE SLEEVE BUSHINGS 6050 SLIDING BEARINGS OIL HOLES.
(60x65x50)
FB092 TIN BRONZE SLEEVE BUSHINGS 5050 SLIDING BEARINGS OIL HOLES.
(50x55x50)
FB092 TIN BRONZE SLEEVE BUSHINGS 6560 SLIDING BEARINGS OIL HOLES.
(65x70x60)
FB092 TIN BRONZE SLEEVE BUSHINGS 5040 SLIDING BEARINGS OIL HOLES.
(50x55x40)
FB092 TIN BRONZE SLEEVE BUSHINGS 1620 SLIDING BEARINGS OIL HOLES.
(16x18x20)
FB092 TIN BRONZE SLEEVE BUSHINGS 12060 SLIDING BEARINGS OIL HOLES.
(120x125x60)
FB092 TIN BRONZE SLEEVE BUSHINGS 2525 SLIDING BEARINGS OIL HOLES.
(25x28x25)
FB092 TIN BRONZE SLEEVE BUSHINGS 4025 SLIDING BEARINGS OIL HOLES.
(40x44x25)
Bronze alloy | Chemical Composition (%) | Type |
CuSn8 | Cu=91.3% Sn=8.5% P=0.2% Pb=0% Zn=0% | Lead-Free |
1.Can tolerate high loads and blows
2.Works well, even in dirty environments
3. The lubrication depots, which perforate the bearing surface,
give excellent lubricating characteristics
4.Good thermal dissipation
5. A broad range of dimensions is held in stock
6.Extends the interval between lubrications by 6-8 times, compared
to traditional slide bearings
WB702 & WB700 bronze bushes are very easy to mount in various applications, thanks to their minimal bulk. In addition to being easy to mount, this type of bush is set apart by its excellent sliding capacity and simplified lubrication (long lubrication intervals).
Lubrication Pockets Self-Lubrication bushings phosphor bronze CuSn8 Wrapped bronze bearings must be lubricated with grease or oil on installation. High-quality lubricant is essential as it will reduce friction and wear by forming a film between the plain bearing and the shaft.
WB702 bronze sintered bronze bushing wrapped bearing with holes gleitlager | Bronze Bushing Stock Size
WB702 bronze bushings with holes It is suitable for high load, lower speed applications like construction, Transport, and agriculture machinery.092 is deriving from 090; the difference between 090 & 092 is Indentations on the working surface, which substituted by Through-holes. These holes will allow greater capacity to collect lubricant, which builds up a lubrication film at the start of the movement and reduce the friction.
Bearings are thin-walled, rolled CuSn8 parts provided with depots for use with lubricants. They feature high-load capacity enabling compact, high-performing, low-maintenance bearing locations.
As variant with rolled-in diamond-shaped lubrication recesses. This type is primarily designed to cope with cases where surrounding construction elements such as gear wheels are oil lubricated. Equally suitable are commercially available, pumpable greases or pastes.
also has lubrication recesses. However, these are filled with a solid lubricant, thus permitting operation without additional lubrication.
If greater demands are made on grease supply, with end-to-end lubrication holes would be the type to use. This variant is less suitable for oil lubrication due to its design.
Cusn8 Bronze Bushings DZA CuSn8 Sintered Brass Bushing for sale – Wrapped Bronze
WB702 & WB700 bronze bushes are made from phosphorous bronze. These types of
bushes, both cylindrical and flanged, are
cut from bronze sheets with a thickness between 1 and 2.5 mm. The
main features of 700 and 702 bronze bushes are high load capacity,
high thermal conductivity, and good resistance against bumps and
oscillations. The composition is the same as wb-900, but with holes to collect the lubricant instead of indentations.
We are offering Precision Bushes and Washers in Phosphorus Bronze, Gun Metal, Aluminium Bronze, High Tensile Brass in various grades.
We manufacture these parts as per the Drawing / Samples provided by the customers. We can also design the parts as per the requirements of the customers.
Agricultural machinery, hydraulic systems, bearings for impact loading and shock stress applications, construction machinery, bearings used in handling and conveyor technology and many more.
It widely applied in hoisting machines and other construction machines, automobiles, tractor, trucks, machines tools and some mineral engines.
702 and 700 bronze bushes can be used in different applications,
for example:
lifting equipment and platform lifts;
machine tools;
automobiles;
tractors;
trucks; etc.
Bronze Bushes and Oil Pockets WB702 & WB700BRONZE BUSHES
CuSn8 Wrapped Bronze Bearing Diamond Or Ball Shape Oil Sockets
Composition of Bronze Bushing 702 and standard oil hole 702 Oil Indentations/Holes
Dynamic load limit | 60N/mm² |
ompostions | CuSn8P0.3 or CuSn6.5P0.1 |
PV limit | 2.8N/mm²*m/s |
HardnessHB | 90~120 |
Speed limit | 2.5m/s |
Temp.limit | 200°C |
The internal surface of 700and 702 bronze bushes can be supplied
with spherical pockets
(spherical cap pockets) or with diamond-shaped pockets (lozenge cap
pockets). The VIIPLUS range also includes a series of entirely
bronze bushes, originating from the 700 series, with the difference
being that the spherical and lozenge pockets on the sliding surface
are replaced by through-holes (702 types), therefore with greater lubrication capacity and high resistance
against chemical agents.
SIZE 090 Bronze wrapped bushing
START YOUR PROJECT WITH AN APPLICATION ENGINEER