VIIPLUS INTERNATIONAL |
|
Made in china viiplus bushings website:www.bronzegleitlager.com.
easy ordering & convenient delivery. send inquiry for your
pricing.
C86300 Manganese bronze bushings Solid Bronze Lubrication | VSB-50 SIMILAR Solid Oilless Bearing: Oiles #500 SP 101 102 JDB JFB SPB
SOB SPF SOBF
VIIPLUS stocks an inventory of plain bronze sleeve bushings in industry
standard sizes.
Our standard sleeve bearings are manufactured out of continuous
cast C86300 Bearing Bronze. Plain bushings are also manufactured
from various other customer specified alloys.
In addition to the industry standard sizes, we manufacture sleeve
bearings to your specific size and tolerance requirements. We can
manufacture sleeve bushings from custom prints, specific sizes, or
we can reverse engineer your sample parts.
Plain sleeve bearings are utilized in a variety of applications.
Their good load carrying and anti-friction properties make them an
excellent general purpose bearing.
VSB-50 Solid Bronze Metallic Self-lubricating Bearings
Cast Bronze Bearing with Graphite Plugs
Material
Manganese bronze bushings
CuZn25AI5Mn4Fe3
VSB-50 Solid Lubricating Bearing is produced by strengthening brass
that has good physical performance and good capability for casting.
What's more, the brass material has pretty good anti-erosion
abitity in air, fresh water and sea water. The surface is regularly
and finely machined with sockets in which particular solid
lubricant is filled. The product is widely used on consecutive
casting and rolling machines, mine-exploiting equipments, ships,
steam engine, etc.
VSB-50 Solid lubricating bearings
1. May work without any ol for long period
2. Extremely high load capacity, good anti-wear and lower friction
3. Particularly appropriate for low speed and high load
4. Suitable for reciprocating, oscillation or intermittent motion
where oil film is hard to be formed
5. Good chemical resistant and anti-corrosion characteristics
6. Can b€ used in wide range of temperature from -40℃-+300℃
VSB-50 SOLID LUBRICANT SLIDING BEARINGS material is made of strong cast bronze based metal with special solid lubricants embedded. The base metal withstands high load and the solid lubricants provide self-lubrication. The bearing shows excellent performance without pre-lubrication under conditions of extreme high/low temperature with low speed. This material provides a maintenance-free bearing solution, particularly for high load, intermittent of oscillating motion.
Grade | 50# | 50S1 | 50S2 | 50S3 | 650S5 |
Material | CuZn25AI5Mn4Fe3 | CuSn5Pb5Zn5 | CuAI10Ni5Fe5 | CuSn12 | CuZn25AI5Mn4Fe3 |
Density | 8 | 8.9 | 7.8 | 8.9 | 8 |
Hardness | ≥210 | ≥70 | ≥150 | ≥75 | ≥235 |
Tensile strength | ≥750 | ≥250 | ≥500 | ≥270 | ≥800 |
Yield strength | ≥450 | ≥90 | ≥260 | ≥150 | ≥450 |
Elongation | ≥12 | ≥13 | ≥10 | ≥5 | ≥8 |
Coefficient o linear expansion | 1.9×10-5/℃ | 1.8×10-5/℃ | 1.6×10-5/℃ | 1.8×10-5/℃ | 1.9×10-5/℃ |
Max.Temp. | -40~+300℃ | -40~+400℃ | -40~+400℃ | -40~+400℃ | -40~+300℃ |
Max.dynamic load | 100 | 60 | 50 | 70 | 120 |
Max.speed(Dry) | 15 | 10 | 20 | 10 | 15 |
N/mm²*m/s(Lubrication) | 200 | 60 | 60 | 80 | 200 |
Compression deformation | < 0.01 mm | < 0.05mm | < 0.04mm | < 0.05mm | < 0.005mm |
Product NO. | Chemical Compositions | ||||||||
VSB-50 | Cu | Zn | Al | Fe | Mn | Si | Ni | Sn | Pb |
60~66 | 22~28 | 5.0~8.0 | 2.0~4.0 | 2.5~5.0 | <0.1 | <0.5 | <0.2 | <0.2 |
Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Sliding plates
Bearing forms made to order: standard forms in special dimensions,
thrust washers, flanged thrust washers, half-bearings, special
shapes obtained by stamping or deep drawing, customized bearing
designs
This kind of bearing can be applied under dry, high temperature,
high pressure, corrosive, water or other chemical environments when
no oil can be introduced. It is widely used in automotive products
line, water engineering, dam gate, plastic industries, successive
casting machines, steel rollers in metallurgy industry, mineral
machines, ships, turbo generators, hydraulic turbines and injection
molding machines...
Products are widely used in continuous casting machines, mining
machinery, ships, gas turbines and so on.