IP65 AI 4000L/H Smart Leak Detector Water Sensor Automatic Shut Off

Full Automatic With Filtering Capability Water Leakage Protector High Accuracy AI Water Leakage Sensor

What is a leak detection system?

A leak detection system monitors the flow of water through a pipeline. When abnormal behavior is detected, the system cuts off the water flow to the entirety of the household by closing a valve within the leak detector. Leak detection systems are usually installed at the water’s point of entry into the home. This way, no matter the problem, water flow can be shut off from every water-using fixture and appliance, protecting the whole of your home from disastrous and expensive damage. Whether a toilet flapper becomes jammed, a tub is left running too long, or a fitting bursts behind a wall, a leak detection system will immediately recognize the escalation in water usage. Leak detection systems are programmable, letting you customize shut-off settings based on your household’s water usage patterns. They also connect to smartphones via an app, sending you alerts when they detect irregular water flow. This allows you to protect your property remotely, whether you are at work or on a vacation thousands of miles away from your home.

Product Details

The Wi-Fi connectivity of most leak detection systems gives you the power to monitor your water usage in real-time. The leak detectors will notify you via an app when a leak has sprung, cutting off water flow before the small leak morphs into a catastrophe. Though the leak detection systems are equipped with smart valves that will immediately stop water flow when they sense flooding, the real-time tracking lends helpful insight into your household’s water usage. Many leak detectors have both live and historical data visible within the app. Using this data, you can observe when your water consumption is highest and what appliances or fixtures are triggering the water usage.

Leak detection systems are also capable of detecting when pipes are in danger of freezing. When pipes freeze, they are at risk of cracking or bursting, (as water will expand as it hardens into a solid form). This can lead to costly plumbing repairs, not to mention potential flooding if the pipes thaw and water flows through a broken pipe. If temperatures within the pipes drop below freezing temperatures, leak detection systems will sever the water connection until temperatures rise or the homeowner assesses the risk and turns the water supply back on.

Development Of Water Leakage Protection Technology

1 - Name: Distributed probe technology

  - Theory: When water touches the electrode, raise the alarm and close the valve.

  - Problems: 1) False alarms in humid environments, high false alarm rate.

                      2) The monitoring range is limited, the distribution position is difficult to determine, and the internal leakage cannot be identified.

2 - Name: Hall detection mechanical measurement technology. (Mechanical gear type)

   - Theory: The gear is driven by the water flow to mechanically measure the one-time water consumption or

                   the time of one-time water use, and the valve will be closed if it exceeds the set the alarm.

   - Problems: 1) Driven by gears, affected by water quality, low precision, small range ratio, and short life;

                          It can only be installed horizontally or vertically.

                      2) The monitoring range is limited, the distribution position is difficult to determine, and the internal leakage cannot be identified.

3 - Name: Ultrasonic detection mechanical measurement technology

   - Theory: Accurately measure the one-time water consumption or the one-time water duration through ultrasonic waves,

                  and the alarm will close the valve if it exceeds the set value.

   - Problems: 1) The algorithm is limited, and only one-time continuous water consumption time and one-time continuous water consumption can                             be used (consumers cannot set it, and the false positive rate is high)

4 - Name: AI Adaptive Ultrasonic Measurement Leak-proof Technology

   - Theory: Ultrasonic precision measurement technology is adopted, and the water leakage signal can be accurately captured through AI                                intelligent calculation. The alarm can be sent through the Internet, the user can be notified, and the valve can be closed.

   - Advantages: 1) Long life, no resistance to water flow, no pressure loss, not affected by bad water quality.

                          2) High precision, large range ratio, no pressure loss, can accurately capture flow abnormalities from 2 liters/H (micro-leakage) to                                4 tons/H (burst pipe); users do not need complicated settings, AI calculation, and the false alarm rate is extremely low.

FAQ:

Q1: Are you a manufacturer?

A: Yes. We are a top manufacturer of water filters in china and an industry leader and standard drafting units. For the water prefilters, we already developed over 10 generations of different types of washing modes for the filters.

Q2: Can we use our logo/brand?

A. Yes, we already do OEM and ODM with famous brands like Honeywell, Pentair, Vaillant, and many other first-tier brands in the world.

Q3: Can you offer sample to check the quantity?

A: Yes. We offer agent prices for samples.

Q4: What's the order delivery time?

A: Our capacity of production is 1500000 units per month and the Lead time is according to the order quantity, order models, and packing. Generally, it takes about 7-25 days.