Double Stage Vacuum Extruder Clay Brick JKY75 Automatic Brick Making Machine

Automatic Brick Making Machine Double Stave Vacuum Extruder JKY70 for Brick Factory

JKY75 Automatic Brick Making Machine Double Stave Vacuum Extruder for Brick Factory

Automatic Clay Brick Making Machine Double Stave Vacuum Extruder JKY70 for Brick Plant

This machine can be also called Brick Extruder, Brick Extruding Machine, Clay Brick Maker, etc, whose function is to make green green brickss, wet bricks under high pressure and vacuum condition.

JKY75 Double Stage Vacuum Extruder, is the largest model in China, it comes with 75cm diameter of the mud chamber. The production capcaity can be 50000 bricks per hour, it can extrude out the mud column at the required size at vacuum condition. 

JKY75 Double Stage Vacuum Extruder is welcomed by the large capacity production line of brick manufacturers. 

Features:

Higher daily capacity and energy-saving design, save production cost
Hard-gear speed reducers are used to ensure working stability and performance
Suitable for clay, shale, coal gangue, coal ash, slurry etc different materials
Finished bricks can be solid bricks, hollow bricks, or blocks
Daily output can be one lac, two lac, or more
Can work with Hoffman kiln, tunnel kiln, also traditional Zigzag kiln
-0.092 Vacuum Degree provides higher pressure and improve the strength of finished bricks
Controlled by the electrical cabinets, easy to operate and maintain
Durable spare parts can save the production cost for customers

Application:

Double Stage Vacuum Extruders are essential brick making machines for the brick factories, which can extrude out the mud column, then by the cutting machines, customers will get the wet bricks in required size. This clay brick making machine is available for the materials of clay, shale, coal gangue, slurry, river sludge,etc. According to different daily capacity, Halstec advises JKY50, JKY55, JKY60, JKY70, JKY75, and JKZ100 or JKZ 120.

Specifications:

Working Principle

Materials after extruding mixer will enter the bottom of Extruder and start the mixing and extruding work again. Under the vacuum condition, materials will push into the bottom box. Materials will go through machine neck, machine mud chamber, machine head, and machine extruding mouth. Then mud column with specific shape and size will be extruded out. During this procedure, vacuum pump and air compressor will be needed. Vacuum pump can provide vacuum working condition, and air compressor can provide air source for the clutch. All these machines work together can ensure the normal production of automatic clay brick making plant.

Overseas Project Show

Clay brick making machines for automatic brick manufacturing plant are widely exported to the whole world, such as Uzbekistan, Russia, Indonesia, Vietnam, Myanmar, Malaysia, South Africa, etc. Below are the projects show for auto clay brick factory, share with you...

Finished Brick Samples

According to different usage purpose, finished bricks can be divided into out-wall decoration bricks, and inner-wall construction bricks.

Out-wall decoration bricks come with smooth surface and uniform color , and normally burning fuel is natural gas or coal powder, which is showered into the burning kiln by specific tube system. Out-wall decoration bricks also can be called as Face bricks.

Inner-wall construction bricks, normally featured with rough surface, but higher strength. Burning fuel for inner-wall construction bricks is coal, which can be added into the raw materials, or threw from the top of burning kiln.

Below is the sample for finished bricks, the size, shape and hole rate can be customized as the production requirements of clients.

Customers Show

With around 20 years experience of international trading, Halstec has set up more than 200 brick factories all over the world, such as Indonesia, Uzbekistan, India, Myanmar, Vietnam, South Africa, Zimbabwe, Bangladesh, etc. Below is the glimpse of our clients, hope can be your partner in very soon future.

General RFQ...

Q1: What can the machines be used for ?

These brick making machines can be used to produce fired red clay bricks, solid bricks, hollow bricks, perforated bricks, fired clay bricks, etc.

If you want to set up one brick factory or brick making plant, to make bricks and sell bricks, then you will need these machines.

Q2: How much the machines or whole production line?

Price could be huge difference according to different production requirements. For example, one day make 100000 bricks, one day 200000 bricks, or one day 300000 bricks, would need different model, different capacity machines, also kilns. So if wanna to get accurate reference price, then better consider what kind of factory you want to own first.

You can get reference invest idea as: 200000USD, 500000USD, 1000000USD... etc

Q3: What will be needed for one brick factory?

Actually, when you have an idea to set up brick factory, you have to think about the land, electricity, workshop, brick machines, electrical equipment, brick dryer, brick oven/kiln, etc.

Q4: What should be consider before setup one new automatic brick plant?

-Better to make some investigation for local market requirements, find out which capacity is good to run, for example, one day 100000 bricks, one day 200000 bricks, or one day 300000 bricks??

-Then confirm the brick type and size, and related daily quantity.

- Get the initiatory design for whole line, which can be reference for land purchase.

-Confirm the raw materials condition, better make a material test before purchase land.

-Burn bricks will need burning fuel, so coal powder or natural gas, which one is available.

-Combine the investment to confirm final design for whole brick manufacturing plant

-Start purchase and construction work...