★ The empty bottles will be sent to washer of monobloc filling
machine through belt conveyor, 4 bottles per shift, each 4 bottles
will be calculated and stopped by sensor-cylinder, and 4 bottles
will be clamped by clamps at holding neck positions; The bottles
will be reversed for bottle rinsing;
★ The washed bottles will be sent to filler by conveyor, Block
cylinder block 4 bottles in filler conveyor; push cylinder will
push bottles under filler, lift cylinder will take bottles to
filler heads, open filling value, filling start. The filling is
gravity filling; it is easy to control precision. After this
process, the bottles will be returned back to conveyor by reverse
repeat.
★
A, Advanced design of monobloc filling machine: 1, East for changing bottles within minutes; 2, Flowmeter is the
heart of the machine, is with special design, it can do correct
filling, no need cleaning; 3, Strong point of the machine is the
machine can fill liquid and also semi-liquid. 4,Easy filling volume
change by PLC –touch screen; 5, Capacity is selective;
★B, Special filling method: 1, The filling volume is controlled by volume, is quite precision,
when the container is arriving at the set position, the plunger
will generate precision pressure; 2, When there is foam generate
during filling, the filling method can be adjusted, the filling
head can go into bottle bottom to fill; 3, The machine is set with
automatic absorbing system, the extra liquid will be absorbed into
filling head, no liquid will be outside of bottle and in filing
machine;
★C, Precise control: 1, Precision:: ±0.3% 2, No bottle , no filling
Parameters: Filling range: 1000-6000ml Air compression: 0.25-0.35Mpa 0.1M3/min
★ The bottle washer filler capper line is used for capping for
plastic screw caps, it includes auto cap loader and capping system
2 parts. Workers put bulk qty caps into cap loader, the cap loader
will unscramble caps automatically and bring caps down in cap rail
and then to capping head. Cap loader can hold more than 200pcs of
caps each time, it will be convenient for adding caps often. The
cap loading system is with cap anti-reverse device, the cap will be
returned back to cap loader again when there is reverse cap.
★ We use cap catching capping system, When capping head catch cap,
it will go down to bottle mouth and finish capping.
★ The capping head is by Italian magnetic technique, it will
protect caps not to be destroyed. The capping correctness will be
99%. The opposite caps will be deleted automatically. The capping
head is an separate part. Change cap is only need to change capping
head, easy for change and operation. The whole machine is made from
SUS304, long shelf time.