|
[China]
Trade Verify
Address: H-No15, GuoTai north rd, Yangshe town,Zhangjiagang city,JiangSu province, China
Contact name:Alice Gu
Zhangjiagang City FILL-PACK Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Automatic Linear servo 6 Cavity PET bottle blow molding machine
suit
>>> Product Introduction:
FP-6000S Full automatic blow molding machine is suitable for
producing PETplastic containers and bottles in all shapes. It is
widely used to produce the carbonated bottle, mineral water,
pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot
fill bottle etc.
>>> Product Features:
1. Two ways of operating: automatic and manual
2. Safe, reliable and unique design of the position of valve to
make the pneumatic diagram in the machine easier to understand.
3. Low cost, high efficiency, easy operation and maintenance, etc,
profited from the fully automatic technological process.
4. Ideal cooling system make the finished bottles without any
flaws.
5. Easy for you to install, test and start up
6. Low rejection rate: less than 0.2%.
>>>Technical Paramters:
Molding | Max. stretching distance | mm | 800*350mm |
mold thickness | mm | 180mm | |
Number of Cavity | Cavities | 6 | |
Container | bottle body diameter | mm | 30mm-110 mm |
bottle height | mm | 50mm-320 mm | |
bottle neck diameter | mm | 18mm-38 mm | |
Theoretical output | bph | 5200-7500 | |
power voltage | v | 3Phase 380v /50HZ | |
installed power / actual power | kw | 72kw/56kw | |
Servo system | kw | Taiwan Delta | |
Items | Name of Machines | Model |
1 | Blow Moulding Machine | 3700*2050*2200mm/4000kg |
2 | Preform Unscramble | 2000*1350*2550mm/550kg |
3 | HP Air Compressor | 4.8 m3/ min 30Kg |
4 | LP Air Compressor | 2.0 m3/min 12Kg |
5 | HP/LP Air Dryer | 5.0 m3/ min 30Kg 2.0 m3/min 10Kg |
6 | HP/LP Air Filters | 5.0 m3/ min 30Kg 2.0 m3/min 10Kg |
7 | HP/LP Air Tank | 2.0 m3/ min 30Kg 1.0 m3/min 10Kg |
8 | Mould Chiller | 5HP |
9 | Blow Mould | 250-750ml |
10 | PLC | Delta / Taiwan |
11 | Touch Screen | Delta / Taiwan |
