Success in water beverage production requires focus on maximum
output and efficiency, with commitment to hygiene, food safety and
cost optimisation. Whether you're producing still or sparkling
water, our unmatched expertise helps you achieve more with
extensive technical knowledge and packaging capabilities.With over
10 years of experience in designing and implementing customised
complete PET line solutions for water, we can help you reach your
production targets. Over the years, we have been committed to
improve the structure of equipment, optimize the performance of
equipment to achieve high capacity and low energy consumption.
Washing part
1. Except the down framework, the transmission parts and some parts
that must be made of special materials. Other spare parts are made
of stainless steel 304.
2. The roller bearing is made of stainless steel, the sealing ring
is made of EPDM material, and plastic is made of UMPE.
3. The gripper is made of stainless steel, the position where hold
the bottleneck is also made of stainless steel, compared with the
traditional rubber gripper, it is much hygiene, durable, and no
quick-wear parts, the screw parts of the bottleneck can avoid being
polluted by the rubber gripper.
4.The gripper equipped with high-efficient spray nozzle, it can
develop to any position of inwall of the bottle, and can save
rinsing water. There is a cover above the spray nozzle which can
prevent water spilling; and there are regulatory recycle slot and
recycle pipes under the nozzles.
5. Rinsing time can be guaranteed for 4 seconds.
6.By adjusting the height of the rotary parts to adapt for
different bottle height
7. The motivation is derived from the driven system in the
framework passed by gear.
8.The supplying of rinsing water is controlled by solenoid valve.
Filling part
1) Adopted Germanyanti-corrosion non-maintaining bearing that can
reduce the pollution of filling to the environment.
2) The rotate plate is made of SUS AISI304, large flat toothed
bearing.
3) The whole valve is made of 304 stainless steel.
4) The filling system has a CIP circulation system to wash the
pipeline and fake-cup used for cleaning filling valve.
5) The liquid supply adopts the automatic pneumatic valve magnetic
liquid-level switch to control the liquid tank automatically.
6).High speed and mass flow filling valve ensures the high filling
speed and exact fluid level. Parts contacting liquid are all made
of excellent stainless steel or food grade engineering plastic.
Capping part
1)Introduce most advanced cap sealing technology called France
“ZALKIN ". With the help of expert from institute of electro
mechanics and mechanical engineering of Shanghai Communications
University, we successfully designed. For example: I) the screwing
capping head cam (the main parts which can assure the machine run
stationary), while adopting “ZALKIN” technology, the expert improve
the authenticity and stability of the machine focused on dynamics
and kinematics. II) Screwing capping head (the main parts which can
assure the capping quality).
2)The screwing capping head is dual-purpose design; it is suitable
for flat cap and sport cap.
3)The device which can take out the reverse cap and prevent the
reverse cap passing is settled in the cap-falling guide.
4)A group of photoelectric switches are settled on cap-falling
guide. The machine will stop when there is no cap on the guide. 5)A
bottle inlet detect switch is settled on the screwing capper.
6)There are aseptic nozzles between the transition poking wheel and
filling parts to rinse the product rested in the bottleneck screw
parts.
7)There is a cap-lock cylinder in the joint between the cap-falling
guide and poking cap plate. It is realize that no feeding no cap.
8)By adjusting the height of the rotary parts to adapt for
different bottle height.
9)The motivation of the screwing capper is derived from the driven
system in the framework and passed by gear.
10)The main parts of the screwing capper are processed by the
digital-control processing center.
Model | | | | | |
Capacity(B/H)(500ml) | | | | | |
Bottle size | Neck:φ20-50mm;Height:150-320mm |
Water pressure | |
Water consumption | |
Washing station | | | | | |
Dripping station | | | | | |
Filling precision | | | | | |
Air pressure | | | | | |
Air consumption (m³/min) | | | | | |
Power(kw) | | | | | |
Weight(kg) | | | | | |
Dimension(mm) | | | | | |
Application: