Complete Carbonated Drink Filling Machine , Energy Drink Production Line

Carbonated beverage rising filling capping 3 in 1 machine

1.Products Introduction:
The sries equipment is used in production gas contaning water of PET bottle ,such as coca cola ,pepsi ,spirit drinks etc.It carries out washing bottle ,filling and capping on one machine ,the whole machine designing is reasonable ,the appearance is beautiful and the maintenance isconvenient ,it adopts botle handing technology to make changing bottle more convenient ,faster and easier ,the machine adopts PLC control ,touch screen and no-bottle ,no-cap system The key electric elements are from famous international brand.

2.Main components:

1) driving system;

2) bottle-loading air conveyor system,;

3) bottle-rinsing system;

4) handing-over system between rinsing and filling;

5) filling system;

6) handing-over system between filling and capping;

7) capping system;

8) cap-unscrambling system;

9) bottle-unloading system;

10) frame;

11) electrical system.

Technical parameter

Machine pictures

inner look (washing filling)

inner look (filling capping)

washing

filling

capping

electrical system

3. The working process

The bottle enters into the rinsing part of three-in-one machine through air conveyor. The gripper installed on the rotary disk catches bottle and turns it over 180 degrees and makes the bottleneck face ground. In the special rinsing area, the nozzle on the gripper sprays juice to rinse bottle inwall. After rinsing and draining, the bottle turns over 180 degrees along the guide rail and make the bottleneck faces sky. Then rinsed bottle is transferred to the filling part through poking bottle starwheel. The bottle that enters into the filler is hold by neck holding plate. The filling valve acted by the cam can realize up and down. It adopts equal pressure filling way. The filling valve opens and begins filling when it moves down and touches thebottleneck, the filling valve move up and leave the bottleneck when it finishes filling, the full bottle is transferred to the capping part through hold neck transition poking wheel. The stop screwing knife holds the bottleneck, keeps bottle upright not rotating. The screw capping head keeps in revolution and autorotation. It can finish a whole capping course including catching, pressing, screwing, discharging through the action of the cam. The full bottle is transferred to bottle outlet conveyor to the next process through starwheel. The whole machine is enclosed with windows, the height of enclosed window is higher than the peak of the 3 in 1 machine, in the bottom of the enclosed window has return air outlet.

about our company

our main production lines:

1. bottling minereal/pure water production line;

2. barrel mineral/ pure water production line

3. bottling carbonated beverage production line (like coca cola);

4. bottling juice production line;

5. canning beverage production line;

6. glass bottle beer production line;

7. milk/tea filling&package line;

8. oil filling&package line;

our two workshops

certificate