Active Member
|
[China]
Address: South Xinyuan Road, Juqiao Economic Development Zone,Luyuan Town, Zhangjiagang City, Jiangsu Province, China
Contact name:Mike
Zhangjiagang Baisu Machinery Manufacture Co., Ltd. |
|
|
0 ~ 2L HDPE Small Bottle Automatic Blow Molding Machine 550BPH Capacity, Plastic Bottles Automatic Blow Molding Machine, PE Bottles Automatic Blow Moulding Machine
QUICK VIEWS
1. SRB70D-2 specially used for PE & PP bottles, jerrycan, kettles, containers and jars, output >500 BPH.
2. Its output for 1.5L flat bottle or jerry can with handle is 500 Pcs/hour, daily capacity is 12000 bottles.
3. The output for 1000ml flat bottle without handle is 550 Pcs/hour, the daily capacity is 13200 bottles.
4. The output for 750ml detergent bottle or liquid soap bottle is 600 Pcs/hour, the daily capacity is 14400 bottles.
|
MAIN FEATURES
1. SRB70D-2 double head central distance is 160mm, suitable for bottle diameter or width small than 135mm.
2. Machine total control system with convenient operation page design suitable for remote technical support.
3. Adopt pressure / flow double proportion control for hydraulic system, insure platen moving speed & smoothness.
4. Aluminum cantilever box, product guidance shelves, scraps sliding channels to convenient actual production. |
Click above picture to see SRB70D commissioning video
TECHNICAL PARAMETERS
| Machine Model | HDPE Blow Molding Machine |
| Max Product Volume | 2 L |
| Machine Weight | 5.5 Tons |
| Machine Size | 3.8 x 2.2 x 2.5 m |
| Screw Diameter | 70 mm |
| Plasticizing Capacity | 90 KG |
| Clamping Force | 68 KN |
| Platen Size | 320 x 390 mm |
| Platen Opening Stroke | 150~500 mm |
| Max Mould Size | 360 x 360 mm |
| Double Head Central Distance | 160 mm |
| Max Product Diameter or Width | 135 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 100 mm |
| Total Power | 48.5 KW |
| Average Energy Consumption | 31.5 KW |
PRODUCTION ARRANGEMENT
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 1.0m3/min, 0.6Mpa
5. Water Supply Requirement: 8 Tons
6. Machine Power Consumption: 31.5 KW
7. Production Line Power Consumption: 45 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 2 Workers
|
PRODUCTION FLOW
The working flow of double station plastic container manufacturing machine production flow is basically like this. The PLC in the electronic control case sends the instruction, the hydraulic system receives the instruction, the fuel tank and the motor start to operate, drives the screw to run, and extrudes the embryo through the die head. The opening and closing mold begins to be closed, the needle is blown, cooled, and plastic products are formed.
