Active Member
|
[China]
Address: South Xinyuan Road, Juqiao Economic Development Zone,Luyuan Town, Zhangjiagang City, Jiangsu Province, China
Contact name:Mike
Zhangjiagang Baisu Machinery Manufacture Co., Ltd. |
|
|
Small Car Water Tank Blow Moulding Machine With Lubrication Pump SRB65-1 , Automobile Water Tank Blow Moulding Machine , Air Duct Vent Plastic Water Tank Manufacturing Machine
QUICK VIEWS
1. SRB65-1 is single station single head plastic water tank blow moulding machine for 5L as maximum.
2. Its output for 1L small automobile water tank is 100 Pcs/hour, for car air vent hose is 170-175 Pcs/hour.
3. Adopt pressure / flow double proportion control for hydraulic system, insure platen moving speed & smoothness.
|
TECHNICAL PARAMETERS
| Machine Model | Single station extruder blowing machine |
| Max Product Volume | 5 L |
| Machine Weight | 4.5 Tons |
| Machine Size | 3.8 x 1.8 x 2.5 m |
| Screw Diameter | 65 mm |
| Plasticizing Capacity | 75 KG |
| Clamping Force | 68 KN |
| Platen Size | 320 x 390 mm |
| Platen Opening Stroke | 150~500 mm |
| Max Mould Size | 360 x 360 mm |
| Four Head Central Distance | 160 mm |
| Max Product Diameter or Width | 135 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 95 mm |
| Total Power | 41.5 KW |
| Average Energy Consumption | 26.5 KW |
MACHINE FEATURES
1. Control Unit: WISETECH total machine programmable controller controller and ture colorful touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand
hydraulic valve and seal, proportional control. And has features of
high stationarity and reliability, accurate operation, long
longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous Delta
inverter adopts Italian technology; Screw speed regulation adopts
variable-frequency speed regulation control system. It has the
features of stable rotate speed, powerful power, energy-saving and
so on. Mixing screw has wide applicability to raw materials and the
plasticization quality is even better. Energy-saving machine barrel
and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in
accumulator head, is smooth and dependable. This die head adopts
German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and
balanced.
PRODUCTION ARRANGEMENT
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 6 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 0.8m3/min, 0.6Mpa
5. Water Supply Requirement: 5 Tons
6. Machine Power Consumption: 27.5 KW
7. Production Line Power Consumption: 36.5 KW
8. Whole Line Electricity Arrangement: 100 Amps
9. Minimum Workers Number: 1~2 Workers
|
