Semi Automatic Jar Blowing Machine , 5 Gallon Bottle Blowing Machine

Semi-automatic

5 gallon Bottle Blowing Machine 100BPH For PET Bottles

Product Description

Features:

1.Adopt the new type double bend arm and four pull rod-clamping structure (won the patent). Cross direction; middle mould board is move parallel; the distance between two mold bases is adjusted by the chain wheel. Thus, the clamping force is very strong.

2.The machine frame is produced by the whole complete casting bottom, so that the machine is firm and running stable.

3.Adopt the straight slide way, reduce the friction and lengthen the life of the machine.

4.Double start working button, which is designed for avoiding the injury.

5.Power saving design that can increase your profits.

6.The single direction of pre-form placing and bottle picking, which increase the output.

7.Segregate type air controlling system, which is designed for avoiding waste pollution.

8.The stretching air cylinder is adjusted parallel from front to back, from left to right freely by regulator.

Procedure:

Preform → Preform storing parts → Preform heating(temperature adjustment) → (Pull stretch → Blow air → Release Air → Blow pin and mouth at same time → Close the blow mouth → Forming)→Finished

Parameter

Brand of electric components

a).PLC ------------SIEMENS(GERMANY)

b).Valve for action------------SMC(KOREA)

c).Valve for blowing-----------FESTO(GERMANY)

d).Cylinder(stretch and clamping)-------------FESTO(GERMANY)

e).Controller of preform transfer---------------Servo motor National(JAPAN)

f).Other electric parts are all world-famous brands

Characteristics:

B.1. Produce bottles from 0.1L (2 cavity) to 6L(1 cavities);

B.2. Output capacity up to 1000BPH for 0.1L using two-cavity blow mold;

B.3. Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to 0.01second;

B.4. Equipped with special designed air storage unit;

B.5. Infrared preform heater;

B.6. Heating lamps are adjustable in directions to suit various performs;

B.7. Independent temperature control system for different heating lamps to get ideal preform heating results;

B.8. Operated only by one person without special training;

B.9. Simple installation & startup adjustment;

B.10. Waste rate of finished articles is less than 0.2%.

Auxiliary Machines