Plastic Bottle Rotary Blow Molding Machine 200 - 2000 Ml SGS Approved

Performance and Characteristics

1.The built-in continuous rotating infeed system effectively reduces the space occupied. The consistency of preform position stream lines the process.

2.38mm pitched, more preforms are uninterruptedly heated within the same distance, which improves the efficiency and 30% energy saving.

3.Hinged oven holders make it easy for the operators to change infrared tubes and do maintenance.

4.The preform transfer system with grippers and the variable pitch system are both driven by the servo motors to ensure high speed and accurate preform handling between the two mechanism.

Technical Parameters

Note:

1.The actual output depends on the preform quality and bottle shape.

2.Due to continuous technical development specification would be improved without prior notice.

3.Special designs correspond to customers needs.

Machine Configurations

Note : Due to the upgrading of models, the actual configuration may be inconsistent with above form. Some parts may be replaced by other brand parts which in equivalent price and grade.

HP Air System Model: 52SH-2.0/40

“HENGDA”COMPRESSOR, 52SH-2.0/40 MOD,reciprocating, stationary, in“W”frame arrangement, balanced, single-acting, three stage compression, with crossheads, air-cooled, with cylinders lubrication, equipped with:

TECHNICAL FEATURES

Compressor model 52SH-2.0/40

Fluid to be compressed AIR

Speed rpm 690

Discharge pressure bar(g)40

Effectively produce volume Nm3/min 2.0

Minimum electric motor power kw 22

Nr.cylinders 4

Nr.stages 3

Stroke mm 146

1st stage cylinder dia. mm146*2

2nd stage cylinder dia. Mm108

3ir stage cylinder dia mm 59

Dimension(L×W×H)) mm 1800*1120*1110

Weight kg 660

Delivery connector 11/2”NPT

“V”-Belt Transmission, Including:

- Flywheel Grooving

- Grooved Dribing Pulley

-two V”Belt Set

FAQ