Active Member
|
[China]
Address: North Industry Zone , Huanyang , Zhejiang Province, China
Contact name:Lisa Lee
Taizhou Huyang Reliable Machinery Co.,Ltd |
|
|
Main Procedures
Step 1. Put the preform into preform container and the conveyer will take the preform to orientation units automatically.
Step 2. Load the preform at neck up to preform holder, and then preform is conveyed into baking tunnel.
Step 3. After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.
Step 4. The finished bottle is taken off by automatic discharging system
Machine Features
1.Utilization of automatic central lubrication.
2.Compact space design for convenience of mold-conversion, repairing, and maintenance.
3.Minimized transfer pitch for increasing heating efficiency and saving energy.
4.Swift exchange design for preform mandrels.
5.Optimized air flow in the oven for stable heating process.
6.Easy to adjust, exchange and access heating oven; Protection for preform thread against heating
7.Intact rotating robot grip with linear guider for right access, rapid motion; reducing adjustment and maintenance time.
8.Electronic inspector for ejecting faulty preform and bottles.
9.Fast, safe, and accurate cam-controlled blowing wheel for providing the best bottles.
10.Precise control of blowing technique to produce less-weighted bottle.
11.Smart design for quick conversion of blow mold.
12.Through finite element analysis to optimize modular design for reducing machine wearing and moving inertia.
13.Operating machine through touch panel; program protected by code lock
Machine Parameter
General Information | RM-6000 |
Clamping Force | 565KN |
Clamping Stroke | 80~130mm |
Max Strecthing Stroke | 370mm |
Bottom Moving Stroke | 0~70mm |
Number of Cavities | 6 |
Voltage | 380V |
Theoretical Output | 6000BPH |
Max Mould Thickness | 300mm |
Space Between Tie Bras | 760*380mm |
Number of Heating Zone | 4 Sections |
Total Power | 75KW |
Max Volume of Contanier | 1.5L |
Neck Diameter Range | 16~38mm |
Max Diameter of Contanier | 110mm |
Max Height of Contanier | 360mm |
Low Air Compressor | 10Bar |
High Air Compressor | 30~40Bar |
Blow Molding Machine | 4.25*1.5*2.0m |
Preform Auotloader | 1.1*1.2*2.2m |
Net Weight | 4.0T |
About Reliable Machinery
1.Your inquiry related to our product & price will be replied within 24hours
2. Well-trained & experienced staff are to answer all your inquiries in English and Chinese
3. Working time: 8: 30am ~6: 00pm, Monday to Friday(UTC+8).
4. OEM & ODM projects are both available
5. Your business relationship with us will be confidential to any third party.
6. Good after-sale service offered, please get back to us if you got any questions.
Machine Details
